Vocia LSI-16e - Vocia® Life Safety Interface

Series: Vocia®

Model: Vocia LSI-16e

Part #: 0295.900

Parallel I/O ports for direct interface with fire alarm and emergency equipment
8 monitored I/O and 8 control inputs
Redundant network connection and power supply options
Power and data over a single Ethernet cable
Local storage of configuration data

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Videos

The Vocia® enhanced Life Safety Interface 16e (LSI-16e) is a networked device that serves as an interface between a Vocia system and emergency or fire alarm systems. The LSI-16e may accept up to three sources of power: main power is from an external, standards compliant and battery backed 24V DC source; the LSI-16e can also utilize Power over Ethernet (PoE) delivered via either of its two network ports. The device is equipped with parallel I/O ports for direct interface to fire and emergency control equipment. The LSI-16e uses Ethernet-based control protocols to function within a Vocia system.

Parallel I/O ports for direct interface with fire alarm and emergency equipment
8 monitored I/O and 8 control inputs
Redundant network connection and power supply options
Power and data over a single Ethernet cable
Local storage of configuration data
Rotary switches for unit identification
Up to 4 discrete emergency inputs
16 additional general purpose inputs can be programmed to play an emergency message, enable zone reset or zone silence; maximum of 10 inputs can be assigned per emergency zone
Each general purpose input can be programmed as TTL, high range or monitored high range
General purpose inputs allow monitoring for short to ground and open circuit
Up to 500 virtual inputs via RS232 or Ethernet
Provides system health monitoring via RS232 or Ethernet
Status LEDs
Rack mountable (1RU)
CE marked and RoHS compliant
EN 54-16 certification pending
Covered by Biamp Systems’ warranty

Spec Sheet available - Yes

Depth: 10 in
Height: 1.75 in
Width: 19 in
Product Weight: 6.40 lbs
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
System Fault Relay:
Type:
Single 'Form C' voltage-free
SPST change-over contact
Load: Resistive
Maximum Operating Voltage: 125VAC, 60VDC
Maximum Operating Current: 600mA AC, 1A DC
Maximum switching capacity: 37.5VA, 30W
Minimum permissible load: 10µA @ 10mVDC
Control Inputs:
Number: Eight
Cathode presented at input - pull low to enable.:
Sink Current:
Min: 1mA
MAX: 6mA
Maximum Terminal Voltage: 24V
Isolation: 3kV
Monitored I/O:
Maximum Continuous Current: 0.35A
Current limit: 0.8A
Maximum External Supply: 35V
VMon Input Shutdown: 35V
General Purpose Inputs:
High Range Logic Low: 0-11V DC
High Range Logic High: 12-30V DC
High Range Hysteresis: 1V +/- 20%
TTL Logic Low: 0-0.8V
TTL Logic High: 2-5V
TTL Hysteresis: 1V +/- 20%
Input Transient Protection: +/- 8KV peak
Input Isolation: 500V RMS (isolation from LSI-16)
RS232 port:
Baud Rate: 57600
Connection: RJ45 with shielded Ethernet/PoE cable (Cat5, Cat5e, Cat6 or Cat7)
Power:
Main: 24V DC 15W
PoE: 802.3af Class 3
Compliance:
FCC Part 15B
CE marked
EN 54-16 certification pending
RoHS Directive
UL 60065 Listed, E215636
C-UL Listed, E215636
C-Tick, N24138 (Australia)

Vocia_LSI-16e_Data_Sheet_(Jan11).pdf 449 kb - Data Sheet

Project List

Revit file for Vocia LSI-16 2124 kb - BIM Objects

Project List

Vocia Product Catalog 9064 kb - Brochure

Project List

Biamp Vocia: Five Biggest Challenges of Emergency Communication Systems

Project List

Enhancing Airport Communication - Biamp

Project List

Emerald Terms | | Powered by AV-iQ

bottom of page