Wi-Fi Network I/O Extender with 2 COM Ports

Model: CEN-IO-COM-202

Part #: 6507961

Compact, cost-effective wireless network I/O extender
Communicates to the local network over Wi-Fi® wireless communications
Up to five wireless access points can be memorized
Provides two bidirectional RS-232 COM ports with hardware and software handshaking
Installer setup via Crestron Toolbox™ software or web browser

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The Crestron® CEN-IO-COM-202 is a compact and cost-effective wireless I/O extender designed to easily expand the available RS-232 ports within a commercial or residential system. A small form factor allows the CEN-IO-COM-202 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The two onboard, bidirectional RS-232 COM ports enable direct integration with all kinds of third-party equipment. The CEN-IO-COM-202 communicates to the local network over Wi-Fi® wireless communications, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN-IO-COM-202 via an included 5 VDC power pack.

Compact, cost-effective wireless network I/O extender
Communicates to the local network over Wi-Fi® wireless communications
Up to five wireless access points can be memorized
Provides two bidirectional RS-232 COM ports with hardware and software handshaking
Installer setup via Crestron Toolbox™ software or web browser
Supports TLS 1.2 and Local Authentication security protocols
Powered via included 5 VDC power pack
Compact, stackable IFE micro form factor
Surface or DIN rail mountable
Available rack mount and pole mount options

Warranty - Yes
Spec Sheet available - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Certifications: UL® Listed for US and Canada, CE, IC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 1.20 Amps
DC Voltage: 5 Volts
Depth: 2.86 in
Height: 1.35 in
Width: 5.04 in
Product Weight: 6.40 lbs
Warranty (Length/Type): Limited
Regulatory Compliance: FCC Part 15 Class B digital device
Active Power: 0.80 Watt
WIRELESS COMMUNICATION:
•Transceiver: IEEE 802.11a/b/g/n Wi-Fi (2.4 or 5 GHz 2-way RF), static IP or dynamic IP via DHCP
•Security: 64 and 128-bit WEP, WPA and WPA2-PSK with TKIP and AES
•Range: Up to 50 ft (15 m), subject to site-specific conditions
•Gateway: Requires an 802.11a/b/g/n wireless access point and Ethernet-enabled Crestron control system
Wired Communication:
•RS-232: For 2-way device control and monitoring, supports RS-232 up to 115.2k baud with hardware and software handshaking
Connectors:
•COM 1–2: (2) 5-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support
•USB: (1) Micro-USB Type B console port; For setup via Crestron Toolbox™ software
•PWR: (1) 2-pin 3.5 mm detachable terminal block; 5 VDC power input for included power pack
•G: (1) 4-40 screw; Chassis ground lug
Controls and Indicators:
•PWR: (1) Bicolor green/amber LED, indicates that power is present, amber indicates that the device is booting and not yet ready to operate, green indicates that device is ready to operate
•ONLINE: (1) Green LED, indicates that the device is connected to a Crestron control system via Wi-Fi wireless communications
•SETUP: (1) Red LED and (1) recessed pushbutton for web setup, LED indicates that the SETUP pushbutton has been pressed (times out automatically)
Environmental:
•Humidity: 10% to 90% RH (noncondensing)
•Heat Dissipation: 2.7 BTU/hr
Construction:
•Enclosure: IFE micro form factor, black and blue plastic
•Mounting Freestanding, stackable, surface mount, or 35 mm DIN EN 60715 rail mount; Occupies 8 DIN module spaces (144 mm); Surface/DIN rail mounting bracket included, optional rack mount and pole kits sold separately