Zum Battery Powered Wireless Keypad, 6-button, Gray Smooth
Model: ZUMMESH-KP10CBATT-GRY-S
Part #: 6508321
- Battery-powered Zum™ wireless keypads
- Pair and play control of one or more Zum J-box load controllers
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Choice of single rocker switch or up to six pushbuttons
- Up to three scene presets with pushbutton versions
An extremely slim, battery-powered wireless keypad for controlling Zum™ J-Box Load Controllers. Can be mounted directly to any flat wall surface without requiring any holes or boxes.
The Zum™ battery-powered wireless keypad (ZUMMESH-KPBATT) provides control of one or more Zum J-Box Load Controllers (ZUMMESH-JBOX). It is available with a rocker switch or various combinations of pushbuttons. The rocker switch version offers simple on/off switching and dimming adjustment, with the ability to save one scene preset. The pushbutton versions support the same capabilities with two or three scene presets. All versions allow for mounting to a standard electrical box, or can be attached directly to the wall using screws or two-sided adhesive tape. ZUMMESH-KPBATT keypads are battery powered and can operate for five years or more on a single lithium battery (included).
Built-in Zum Mesh wireless technology affords easy “pair and play” integration as part of a complete Zum commercial room lighting system. Energy-saving options are available to enable daylighting, occupancy or vacancy sensing, and centralized monitoring and management.
Provides six pushbuttons similar to the –KP10BBATT version, but with separate up and down buttons for dimming level adjustment.
Pair and Play
Designed with flexibility and ease-of-use in mind, Zum keypads are pre-programmed with “pair and play” functionality. An installer can simply install the keypad in a room along with Zum load controllers, occupancy or vacancy sensors, and a daylight sensor, set up the room with a few quick-button taps, and then use the keypad to control the lights in the room - no programming required. Room setup can also be accomplished using the Zum app if the room is equipped with a Zum Network Bridge. The Zum network bridge also enables centralize monitoring and management via a Zum floor hub and Zum wireless gateway.
Zum Mesh Wireless Technology
Ultra-reliable Zum Mesh wireless technology provides steadfast peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways.
- Battery-powered Zum™ wireless keypads
- Pair and play control of one or more Zum J-box load controllers
- Zum Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zum wireless lighting control solution
- Choice of single rocker switch or up to six pushbuttons
- Up to three scene presets with pushbutton versions
- Optional sensor disable feature
- Operates for five years or more on a single lithium battery
- Mounts directly to any flat wall surface with no holes or box required
- Allows for mounting to a standard electrical box
- Matching decorator-style faceplate available separately
- Meets CEC Title 24 energy efficiency standards
- Meets ASHRAE 90.1 energy efficiency standards
- Meets UL 916 standard for energy management equipment
- ICC International energy conservation code compliant
- Systems Controlled - Lighting
- Spec Sheet available - Yes
- Depth: 0.42 in
- Height: 4.26 in
- Width: 1.76 in
- Color: Gray
- Construction: Plastic
- Certifications: UL, FCC
- Wireless: Yes
- Number of Buttons: 6
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Power Requirements:
•Battery: 1x CR2032 3 Volt lithium coin cell disposable battery (included)
•Battery Life: Greater than 5 years - Wireless Communications:
•RF Transceiver: 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
•Zum Mesh Range (Typical): 50ft (15m) indoor to nearest peer-to-peer mesh network devices, Subject to site-specific conditions and individual device capabilities
•Note: A maximum of 32 Zum Mesh wireless devices is permitted per room - Controls and Indicators:
•,Buttons: (6) Pushbuttons as follows: ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]), Up Arrow: Press to raise the dimming level for all dimmable lighting loads, Down Arrow: Press to lower the dimming level for all dimmable lighting loads, SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset, SCENE 3: Press to recall the Scene 3 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 3 preset, OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loads, Buttons are also used for creating presets, room setup, and factory reset - Construction:
•Surface Mounting: Adheres to a smooth, flat wall surface using double-sided tape (included) or screws (not included)
•Wall Box Mounting: Mounts to a 1-gang (or larger) electrical box
•Faceplate: Requires a decorator-style faceplate
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/