2-way RF Wireless Transceiver

Model: ZUMNET-GATEWAY

Part #: 6508255

Enables Zum™ Net wireless communication for a single Zum Floor Hub
Supports up to 100 Zum network bridges
Ultra-dependable Zum Net mesh network technology
Dynamic discovery for fast, easy setup
Wi-Fi® friendly channel auto-selection for trouble-free operation

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The Zum™ Net Wireless Gateway (ZUMNET-GATEWAY) is a 2-way RF wireless transceiver designed for use with Crestron® Zum Net wireless devices. Specifically, it enables wireless communication between the Zum Floor Hub (ZUM-FLOOR-HUB) and any rooms on the floor equipped with a Zum Network Bridge (ZUMMESH-NETBRIDGE). Networking each room with the Zum Floor Hub allows each room to be centrally monitored, managed, and controlled as part of a complete Zum enterprise lighting solution. Using Zum Net wireless technology affords fast, easy installation and configuration without wires.

Zum Across the Enterprise

Zum delivers cutting-edge wireless lighting control and heightened energy efficiency for the intelligent enterprise. With each room wirelessly networked to a Zum Floor Hub, Zum synergizes lighting control across the enterprise by providing centralized monitoring, management, and reporting capabilities. Zum Net wireless communication is enabled by simply adding a Zum Network Bridge to each room and pairing it with the Zum Net Wireless Gateway, which connects via Ethernet to the Zum Floor Hub’s Control Subnet port.

Zum Net Wireless Technology

Ultra-reliable Zum Net wireless technology provides steadfast 2-way RF communications throughout a commercial structure without the need for physical control wiring. Employing a Wi-Fi® friendly 2.4GHz mesh network topology, every Zum Net device acts as a routing node, relaying wireless commands between the Zum Net gateway and all the other Zum Net devices to ensure that every command reaches its intended destination without disruption. Each Zum Net device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths. The wireless range between any two Zum Net devices is typically 50ft (15m).

Easy Setup

Setting up a network of Zum Net devices is simple, utilizing dynamic discovery to locate and acquire each device automatically. The Zum Net gateway can support up to 100 Zum Network Bridges. A complete Zum enterprise lighting system commonly consists of multiple Zum Net gateways and Zum floor hubs dispersed throughout a building or campus, all networked together via Ethernet.

Enables Zum™ Net wireless communication for a single Zum Floor Hub
Supports up to 100 Zum network bridges
Ultra-dependable Zum Net mesh network technology
Dynamic discovery for fast, easy setup
Wi-Fi® friendly channel auto-selection for trouble-free operation
Built-in RF network diagnostics
50ft (15meters) range to nearest Zum Net device
Compact “IFE small” form factor
Surface or DIN rail mountable using bracket provided
Available rack mount and pole mount options
Antenna extender available separately
High-speed Ethernet interface
24VDC or PoE network powered
PoE injector or 24VDC power pack sold separately

Wireless Receiver Transmission - RF
Wireless - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Number of Channels: 2
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 2.10 Watt
Current Draw: 0.75 Amps
DC Voltage: 24 Volts
Depth: 5.20 in
Height: 1.35 in
Width: 5.04 in
Product Weight: 0.56 lbs
Supported Devices:
•Zum Net Devices: Supports Crestron Zum Net wireless devices only
•Maximum Devices Allowed: Supports up to 100 Zum Network Bridges per Zum Net Gateway
Wireless Communications:
•RF Transceiver: 2-way RF, 2.4GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
•Zum Net Range (Typical): 150ft (46m) indoor to nearest mesh network device(s), Subject to site-specific conditions and individual device capabilities
Wired Communications:
•Ethernet: 10/100Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3at Type 1 compliant
•USB: USB device port for setup
Controls and Indicators:
•PWR: (1) Green LED, indicates operating power supplied via PoE or 24VDC
•ACT: (1) Green LED, indicates wireless RX and TX data activity
•ACQUIRE: (1) Recessed pushbutton with red LED, used to set up connections with wireless devices
•SETUP: (1) Recessed pushbutton with red LED, used to set up connection with the Zum Floor Hub via Ethernet
•RESET: (1) Recessed pushbutton, for hardware reset
•LAN PoE: (1) Green and (1) Amber LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
Connectors:
•ANTENNA: (1) Connection for supplied antenna
•COMPUTER: (1) Micro-B USB connector, female
•Computer console port, for installer use only
•6ft (2.83m) Micro-B to A USB cable included
•G: (1) 4-40 screw
•Chassis ground lug
•24VDC 0.75A: (1) 2.1x5.5mm DC power connector
•24 Volt DC power input
•PW-2407WU power pack sold separately
•LAN PoE: (1) 8-pin RJ45 connector, female
•10Base-T/100Base-TX Ethernet port
•Power over Ethernet compliant
Power:
•Power over Ethernet: IEEE 802.3at Type 1 (802.3af compatible) Class 1 (3.84W) PoE Powered Device
Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 7 BTU/hr
Construction:
•Enclosure: IFE small form factor, black and blue plastic
•Mounting: Freestanding, surface mount, or 35mm DIN EN 60715 rail mount, occupies 8 DIN module spaces (144mm), surface/DIN rail mounting bracket included, optional rack mount and pole mount kits sold separately