3-way Passive Loudspeaker
Series: V-Series
Model: V12
- 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device
- Symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design
- Results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz
- Mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers
- It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs
The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs. The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.
- 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device
- Symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design
- Results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz
- Mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers
- It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs
- Cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish
- Horizontal Symmetry - Yes
- Speaker Diameter (Driver): 10 in
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 67 Hz
- Minimum Frequency Response (Bandwidth): 0.07 kHz
- Coverage Horizontal: 120 degrees
- Horizontal Symmetry: Yes
- Impedance: 8 ohm
- Maximum SPL (Sound Pressure Level): 139 dB
- Power Handling: 2000 Watt
- Depth: 18 in
- Height: 12.20 in
- Width: 27.50 in
- Product Weight: 75 lbs
- Color: Black
- Splay Angle Maximums: 14 degrees
- Splay Angle Minimum: 0 degrees
Suggested Products
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/