30kHz omni Boundary Installation Microphones, Stainless Steel Finish, Red and Green LEDs, Touch Sensor Output
Model: IMBL30-SS
- Only 1.4375 inch (3.6cm) in diameter
- Available in black, white or stainless finish
- True Semisphere™ polar pattern
- 30kHz flat frequency response
- More gain before feedback
Boundary microphones designed for permanent installation in ceilings and tabletops for conferencing and other speech applications. When capturing every word is critical, the IMB boundary microphones are the most reliable omnidirectional miking solution. Optimized for speech, the IMB microphones feature a flat frequency response out to 30kHz that delivers the highest level of speech intelligibility and articulation. This means less straining to understand the words being spoken due to poor audio quality, so more time can be spent understanding the message being transmitted.
The IMB microphone always reproduces the speaker’s voice with incredible clarity and intelligibility due to the near-perfect polar pattern across all frequencies. This wider coverage also means that fewer Earthworks microphones are required to properly cover a conference room, cutting down on the number of channels of DSP, cables and other ancillary equipment required for the system. Compatible with all DSP systems that provide 24-48V phantom power, the IMB microphones can easily integrate into existing system designs or new installations.
- Only 1.4375 inch (3.6cm) in diameter
- Available in black, white or stainless finish
- True Semisphere™ polar pattern
- 30kHz flat frequency response
- More gain before feedback
- Near perfect polar pattern
- Primary applications include teleconferencing, distance learning, surveillance, boardrooms, government facilities and ambient room miking
- Spec Sheet available - Yes
- Impedance: 65 ohm
- Noise: 20 dB
- Noise: 20dB SPL (A weighted)
- Output: XLR-3 (pin 2+)
- Output Impedance: 65ohm balanced
- Polar Pattern: True Semisphere™
- Power Requirements: 24 – 48V Phantom, 10mA
- Sensitivity: 60mV/Pa
- Weight: 0.28lbs (125g)
- DC Voltage: 48 Volts
- Product Weight: 0.28 lbs
- Color: Stainless Steel
- Minimum Frequency Response (Bandwidth): 60 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Maximum Frequency Response (Bandwidth): 30000 Hz
- Maximum Frequency Response (Bandwidth): 30 kHz
- Signal to Noise Ratio: 20 dB
- Microphone Color: Black, White or Stainless Steel
- Max Acoustic Input: 136dB SPL
- Min Output Load: 1K between pins 2 and 3
- Integrated Low Cut Filter Attenuation: -15dB at 60Hz
- IMBL Light Ring Connector: Phoenix or RJ45
- IMBL Light Ring Voltage: 8-28VDC at 85-170mA
- IMBL Light Ring Activation: Momentary Digital Pulse
Suggested Products
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/