Analog Video Distribution Amplifier with Cable Equalization (1 x 9)

Model: 501ADA-EQ

75 Ohms or high impedance input (jumper selectable)
High common mode range and common mode rejection ratio (CMRR)
Gain Control
Jumper selectable AC or DC coupling
Jumper selectable fast or slow back porch clamp

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 501ADA-EQ Analog Distribution Amplifier is a general purpose amplifier for distributing 75 Ohms analog video signals. The 501ADA-EQ features one balanced equalized input with nine unbalanced outputs. The 501ADA-EQ amplifier has been designed to distribute a wide range of analog video signals. It can also distribute other pulses and signals that are less than 2V p-p. The 501ADA-EQ is housed in the 3RU 500FR frame that will hold up to 16 modules.

75 Ohms or high impedance input (jumper selectable)
High common mode range and common mode rejection ratio (CMRR)
Gain Control
Jumper selectable AC or DC coupling
Jumper selectable fast or slow back porch clamp
DC level control when clamp is enabled
Cable equalizer adjustment range: 0 to 300m of Belden 8281 or 1694
Looping feature with extenal "T" connector
Consistent input impedance if card power is lost
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller
Card Edge LED's: Module Status/Local Fault, Power Supply Status, EQ Warning

Spec Sheet available - Yes

Analog Video Input - Standards: Any analog video format, up to 2V p-p, and 30MHz bandwidth
Analog Video - Number of Inputs: 1
Analog Video Input - Connector: BNC per IEC 61169-8 Annex A
Analog Video Input - Common mode range: > 6V p-p
Analog Video Input - CMRR: > 70dB to 1kHz
Analog Video Input - Signal Amplitude: 2.5V p-p max
Analog Video Input - Cable Equalizer: 0 to 300m of Belden 8281 or 1694 cable
Analog Video Input - Impedance: 75 Ohms terminated, 35k Ohms Hi-Z (jumper selectable)
Analog Video Input - Coupling: AC or DC (jumper selectable)
Analog Video Input - Return loss: > 40dB to 10MHz, > 30dB to 30MHz
Analog Video Input - Clamp Range: > ±600mV
Fast Clamp Attenuation of 60Hz: > 36dB
Analog Video - Number of Outputs: 9
Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
Analog Video Output - Impedance: 75 Ohms
Analog Video Output - Gain Control Range: ±5dB
Analog Video Output - DC Level: < ±100mV (with DC coupling active and back porch clamp disabled)
Analog Video Output - DC Level Control Range: < ±200mV (with back porch clamp enabled)
Analog Video Output - Frequency Response: < ±0.05dB (no equalization); < ±0.09dB for 5 to 100m Belden 8281 or 1694 (to 5.5MHz); < ±0.15dB for 100 to 300m Belden 8281 or 1694 (to 5.5MHz)
Analog Video Output - Differential Gain: < 0.17% 0 to 300m
Analog Video Output - Differential Phase: < 0.19° 0 to 300m
Analog Video Output - C/L gain inequality: < ±0.1% for all cable lengths
Analog Video Output - C/L Delay: < ±2ns
Analog Video Output - Isolation: 42dB to 10MHz, 32dB to 30MHz
Analog Video output - Return loss: > 40dB to 30MHz
Noise Performance (NTC7 Weighting RMS): < -78dB
Noise Performance (15kHz to 5.5MHz RMS): < -70dB
Voltage: +12V DC
Power: 1.2 Watts
EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
Number of Slots: 1

Analog Video Distribution Amplifier with Cable Equalization 54 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page