top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
Master SPG/Master Clock System Including 6 Bi-level/Tri-level Sync Outputs
Model: 5601MSC
- 6 independently timeable programmable reference outputs
- Bi-level or Tri-level outputs selectable
- 2 Independent LTC Time Code outputs
- LTC Input (optional on 5600MSC, standard on 5601MSC)
- Reference loop input for video and 10MHz/5MHz references
Product Info
Tech Specs
Documents
The 5600MSC and 5601MSC Master Sync and Clock Generators are both a broadcast quality master sync pulse generator (SPG) and a master clock. Each provides all of the synchronizing signals needed in a 21st century TV station or post production facility at the same time as solving the problem of locking the in-house master clock system to the master video sync pulse generator.On the 5600MSC, the master clock section provides a primary longitudinal time code (LTC) output on an XLR connector and a 9-pin D connector, as well as a secondary LTC output available only on the 9-pin D connector. The time code may be set from the front panel or referenced to a number of different sources.On the 5601MSC, the master clock section provides two longitudinal time code (LTC) or optional IRIG outputs on XLR connectors and a 15-pin D connector. The time code may be set from the front panel or referenced to a number of different sources.
- 6 independently timeable programmable reference outputs
- Bi-level or Tri-level outputs selectable
- 2 Independent LTC Time Code outputs
- LTC Input (optional on 5600MSC, standard on 5601MSC)
- Reference loop input for video and 10MHz/5MHz references
- GPS option for frequency and time reference
- 3.58/4.43/5MHz frequency reference output (only on 5601MSC)
- 10MHz frequency reference output
- Wordclock output (optional on 5600MSC, standard on 5601MSC)
- Output frequency stability guaranteed better then 1.0 x 10-8 (or 0.01ppm)
- Optional modem for time reference dial up
- 2 GPS based units will be in time and phase even when remotely separated by miles
- Optional test generators available are (refer to ordering options): Composite Video, AES/DARS, Analog Audio Tones, SD SDI, HD SDI & 3Gb/s (only on 5601MSC)
- Optional Network Time Protocol (NTP) server support (GPS option should be ordered with NTP option)
- For 5600MSC, 16 character Alpha-numeric display, with 20 pushbuttons
- For 5601MSC, dual 6 line x 16 character Alpha-numeric display, with 10 pushbuttons
- Rack mountable
- Optional redundant power supply (redundant power hot-swappable only on 5601MSC)
- Automatic changeover units available for dual redundant systems applications
- Compatible with Dual GPS Data Fiber Receivers & Transmitters
- 2 factory presets and 3 user presets available
- VITC reader on reference input for time reference
- Ten Field Pulse is available on NTSC sync outputs
- VistaLINK® control for device configuration and status monitoring
- On 5601MSC, all active components are front panel extractable & serviceable
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): -40 F
- AC Voltage: 240 Volts
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 90 Watt
- Depth: 11.50 in
- Height: 1.77 in
- Width: 19.02 in
- Product Weight: 8 lbs
- Color: Black
- Black Burst: SMPTE ST 170 (NTSC-M), ITU-R BT.1700-1 (PAL-B)
- Bi-Level: Slo-Pal 625i/48, 625i/47.95
- HD Tri-Level: SMPTE ST 274 (1080p/23.98, 1080p/24, 1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98sF, 1080p/24sF, 1080p/25, 1080p/29.97, 1080p/30)SMPTE ST 296 (720p/59.94, 720p/60, 720p/50, 720p/24)
- Pulse Signals: PAL color frame, 1Hz pulse, 1/1.001Hz pulse, 6/1.001Hz pulse
- CW Signals: 5MHz, 10MHz, NTSC-M Subcarrier, PAL-B Subcarrier
- Wordclock: 48kHz Wordclock
- Connector: 6 BNC per IEC 61169-8 Annex A
- Number of Outputs: 6
- DC Offset: 0V ±0.05V
- Return Loss: > 40dB up to 10MHz
- SNR: > 75dB rms
- Output Levels: 1.0V p-p, 2.0V p-p, in 75 ohm, selectable
- Output Type: 10MHz sine wave (default), all other analog sync standards (see above) selectable
- SFDR: > 50 dBc
- Risetime: < 25ns
- Levels: 5V CMOS (1kohm) or ±1V (75?)
- Standard: SMPTE ST 12-1 or IRIG-B
- Frame Rate: 24, 25, 30 and 29.97 (drop frame and non-drop frame)
- Connectors: 3-pin male XLR type, Female DB-15
- Unpowered: Adjustable, 1.0V to 8.0V p-p, balanced
- Powered: 2V p-p with 11V DC offset to drive downstream 1200 series slave clocks
- Output Impedance: 44? balanced (unpowered)
- Rise Time: 40 ±10µs
- Jitter: < 2µs
- IRIG Input/Outputs+IRIG option Standard: IRIG B122, B123, B126, B127
- Level: 1.0-8.0 p-p, blanaced
- Number of Inputs: 1 balanced
- Input Impedance: > 30 kohm balanced
- Sensitivity: 0.25V p-p min
- Wide Mode: ±15ppm min
- Narrow mode: ±0.1ppm min
- Baud Rate: 115200 baud
- Format: 8 data bits, no parity, 2 stop bits
Master SPG/Master Clock System
332 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close

USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 5601MSC
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page