Dual SD-SDI Smart Automatic Changeover

Model: 7700ACO2-SLKE

Video Inputs and Outputs
Auto sensing of HD and SD input formats
Smart Automatic changeover based on user programmable switch logic
Card edge menu control for configuration of operating modes and LEDs for reporting signal presence, router state, module status
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

These modules have dual independent processing paths providing both high density and availability of any HD-SDI or SD-SDI video inputs signals (program and back-up).These modules provides a passive loop-thru of both primary and backup input video sources and provides dual safe program outputs.

Video Inputs and Outputs
Auto sensing of HD and SD input formats
Smart Automatic changeover based on user programmable switch logic
Card edge menu control for configuration of operating modes and LEDs for reporting signal presence, router state, module status
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
Bypass relay protection on main program output
Integrated SoftSwitch technology for clean video and "popless" embedded audio switching
StreamLINK H.264 Video Encoder
Standard Definition H.264 of content for confidence monitoring
Available as a quad-split of all input signals, or one cherry picked signal
Audio is cherry picked as one pair from any input source
IntelliGain Audio and Loudness Processor
Consistent audio loudness levels within a channel and/or program
Gain control within a program interval to preserve audio dynamic range
Artifact-free transitions between program and commercials
Elimination of drastic volume changes during commercials and interstitials
Ideal for aggregator applications and multi-channel playout facilities (DTH, Cable, IPTV...)

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Streaming Decoder/Encoder
Spec Sheet available - Yes

Input Signal Types: Video
Number of Channels: 1
Output (Decoded/Encoded) Signal Type: Video
Active Power: 20 Watt
DC Voltage: 12 Volts
Standard: Auto-detects standard 1.485Gb/s ST 292-1 (1080i/59.94, 1080i/50, 720p/59.94, 720p/50) SMPTE ST 260-1, SMPTE ST 274-1, SMPTE ST 296-1, SMPTE ST 349-1 (HD or SD carrier)270Mb/s SMPTE ST 259-1 (525i/59.94 or 625i/50)
Connector: 2 BNC per IEC 61169-8 Annex A
Input Equalization: Automatic 100m @ 1.5Gb/s with Belden 1694A or Equivalent cable
Return Loss: > 20dB up to 270MHz, > 12dB up to 1.5GHz
Number of Outputs: 2 Smart switched program outputs (Input 1 is bypass relay protected) Loop thru on Input A and Input B
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps nominal
Overshoot: < 10% of amplitude
Jitter: < 0.16UI (HD)
Video Encoding Engine: H.264/AVC (MPEG-4 Part 10) SD Base Profile @ Level 3
Audio Encoding Engine: MPEG 1 L2/AC-3 Pass Thru
Traffic Shaping: Constant bit rate
GOP structure: Configurable GOP sizes
Video Resolution: 525i/625i
Recommended Bit Rate: ? 1Mb/s
Frame Encoding: IP
Frame Rate: Full frame rate
Audio Channels: 1 Stereo Pair (L/R)
Audio Output Bit Rate: Fixed 192Kb/s
Delivery: UDP Unicast/Multicast

7700ACO2-SLKE-HD - Dual HD/SD-SDI Smart Automatic Changeover

Smart Automatic Changeover 116 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page