Analog Video Distribution Amplifier

Model: 7700ADA7

75 Ohms or high impedance input (jumper selectable)
High common mode range and common mode rejection ratio (CMRR)
Gain control
Jumper selectable AC or DC coupling
Looping feature with external "T" connector

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7700ADA7 Analog Distribution Amplifier is a general purpose amplifier for distributing analog signals. The 7700ADA7 features one balanced input with seven outputs. The 7700ADA7 has been designed to distribute a wide range of analog video signals. It can also distribute other pulses and signals that do not exceed 2V p-p. The 7700ADA7 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

75 Ohms or high impedance input (jumper selectable)
High common mode range and common mode rejection ratio (CMRR)
Gain control
Jumper selectable AC or DC coupling
Looping feature with external "T" connector
Consistent input impedance if card power is lost

Spec Sheet available - Yes

Analog Video Input - Standard: Any analog video format up to 2V p-p and 30MHz bandwidth
Analog Video - Number of Inputs: 1
Analog Video Input - Connector: BNC per IEC 61169-8 Annex A
Analog Video Input - Common mode range: > 6V p-p
Analog Video Input - CMRR: > 70dB to 1kHz
Analog Video Input - Signal Amplitude: 2.5V p-p max
Analog Video Input - Impedance: 75 Ohms
Analog Video Input - Coupling: AC or DC (jumper selectable)
Analog Video Input - Return loss: > 40dB up to 10MHz, > 30dB up to 30MHz
Analog Video - Number of Outputs: 7
Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
Analog Video Output - Impedance: 75 Ohms
Analog Video Output - Gain Control Range: ±5dB
Analog Video Output - DC Level: < ±100mV (DC coupling active)
Analog Video Output - Frequency Response: < ±0.05dB (to 5.5MHz)
Analog Video Output - Differential Gain: < 0.17%
Analog Video Output - Differential Phase: < 0.19°
Analog Video Output - C/L gain inequality: < ±0.1%
Analog Video Output - C/L Delay: < ±2ns
Analog Video Output - Isolation: 42dB to 10MHz, 32dB to 30MHz
Analog Video output - Return loss: > 40dB to 30MHz
Analog Video Output - Noise Performance: < -78dB RMS NTC7 weighting; < -70dB RMS 15kHz to 5.5MHz
Voltage: +12V DC
Power: 4.6 Watts
EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
Number of Slots: 1

Analog Video Distribution Amplifier 46 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page