top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Video Monitoring Reclocking Distribution Amplifier, 1 Channel, 7 Outputs
Model: 7700VMDA
- Features independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
- Supports SMPTE ST 259-C (270Mb/s) video with embedded audio
- Return loss > 15dB up to 540Mb/s
- 300m auto eq. at 270Mb/s (Belden 8281)
Product Info
Tech Specs
Documents
The 7700VMDA Reclocking Distribution Amplifier provides inexpensive distribution and composite encoder monitoring of your SMPTE ST 259 (270MB/s) serial digital video signal. The 7700VMDA features an auto-equalized input with seven outputs that can be selected as either SDI or composite analog. The 7700VMDA occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Features independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
- Supports SMPTE ST 259-C (270Mb/s) video with embedded audio
- Return loss > 15dB up to 540Mb/s
- 300m auto eq. at 270Mb/s (Belden 8281)
- Selectable reclocked/composite encoder outputs
- Return loss > 15dB up to 540Mb/s
- Wideband jitter < 0.2UI
- Passes embedded audio to SDI output
- Card Edge LEDs: Signal presence, Module Health Status
- Spec Sheet available - Yes
- Serial Video Input - Standard: SMPTE ST 259
- Serial Video - Number of Inputs: 1
- Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Input - Equalization: Automatic to 300m @ 270Mb/s with Belden 8281 (or equivalent)
- Serial Video Input - Return Loss: > 15dB up to 540Mb/s
- Serial Video Input - Embedded Audio: SMPTE ST 272-A
- Serial Video - Number of Outputs: Up to 7 (jumper selectable)
- Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Output - Signal Level: 800mV nominal
- Serial Video Output - DC offset: 0V ±0.5V
- Serial Video Output - Rise and Fall Time: 740ps nominal
- Serial Video Output - Overshoot: < 10% of amplitude
- Serial Video Output - Return Loss: > 15dB up to 540Mb/s
- Serial Video Output - Wideband Jitter: < 0.2UI
- Analog Video Output - Standard: NTSC, SMPTE ST 170 if input is 525i/59.94; PAL-B ITY 624-4 if input is 625i/50
- Analog Video - Number of Outputs: Up to 7 (jumper selectable)
- Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
- Analog Video Output - Signal level: 1V p-p nominal
- Analog Video Output - DC Offset: 0V ±0.1V
- Analog Video output - Return loss: > 35dB up to 5MHz
- Voltage: +12V DC
- Power: 6 Watts
- EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
- Number of Slots: 1
SD-SDI Monitoring Reclocking Distribution Amplifier
80 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7700VMDA
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page