Video Monitoring Reclocking Distribution Amplifier, 2 Channels, 3 Outputs per Channel

Model: 7700VMDA-2Q

Features independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
Supports SMPTE ST 259-C (270Mb/s) video with embedded audio
Return loss > 15dB up to 540Mb/s
300m auto eq. at 270Mb/s (Belden 8281)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7700VMDA Reclocking Distribution Amplifier provides inexpensive distribution and composite encoder monitoring of your SMPTE ST 259 (270MB/s) serial digital video signal. The 7700VMDA features an auto-equalized input with seven outputs that can be selected as either SDI or composite analog. The 7700VMDA-2Q has 2 channels, each with 3 selectable outputs or can be used as a single input DA with six outputs. The 7700VMDA-2Q occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Features independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
Supports SMPTE ST 259-C (270Mb/s) video with embedded audio
Return loss > 15dB up to 540Mb/s
300m auto eq. at 270Mb/s (Belden 8281)
Selectable reclocked/composite encoder outputs
Return loss > 15dB up to 540Mb/s
Wideband jitter < 0.2UI
Passes embedded audio to SDI output
Card Edge LEDs: Signal presence, Module Health Status

Spec Sheet available - Yes

Serial Video Input - Standard: SMPTE ST 259
Serial Video - Number of Inputs: 1
Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization: Automatic to 300m @ 270Mb/s with Belden 8281 (or equivalent)
Serial Video Input - Return Loss: > 15dB up to 540Mb/s
Serial Video Input - Embedded Audio: SMPTE ST 272-A
Serial Video - Number of Outputs: 3 per channel
Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level: 800mV nominal
Serial Video Output - DC offset: 0V ±0.5V
Serial Video Output - Rise and Fall Time: 740ps nominal
Serial Video Output - Overshoot: < 10% of amplitude
Serial Video Output - Return Loss: > 15dB up to 540Mb/s
Serial Video Output - Wideband Jitter: < 0.2UI
Analog Video Output - Standard: NTSC, SMPTE ST 170 if input is 525i/59.94; PAL-B ITY 624-4 if input is 625i/50
Analog Video - Number of Outputs: 3 per channel
Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
Analog Video Output - Signal level: 1V p-p nominal
Analog Video Output - DC Offset: 0V ±0.1V
Analog Video output - Return loss: > 35dB up to 5MHz
Voltage: +12V DC
Power: 6 Watts
EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
Number of Slots: 1

SD-SDI Monitoring Reclocking Distribution Amplifier 80 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page