top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Wideband RF Fiber Transmitter, 1310nm FP Laser
Model: 7706LT13
- Extended frequency response for extended L-Band and other signals
- Protocol independent design - transports all modulation formats
- LNB power with selectable 13/17V DC
- LNB current limit & short circuit protection
- 22kHz tone on/off for LNB local oscillator control
Product Info
Tech Specs
Documents
The 7706LT is a fiber optic transmitter for RF signals in the extended L-Band or wider frequency range. It accepts a single RF input on coaxial cable and provides a single output for optical transmission. An RF monitor output provides a convenient means of obtaining peak satellite signal strength, or additional signal distribution. Gain may be adjusted manually or managed automatically via AGC. 13/17V DC adjustable LNB power with 22kHz tone is also provided.
- Extended frequency response for extended L-Band and other signals
- Protocol independent design - transports all modulation formats
- LNB power with selectable 13/17V DC
- LNB current limit & short circuit protection
- 22kHz tone on/off for LNB local oscillator control
- RF monitor output for signal peaking and signal distribution
- Manual gain and AGC modes for tuning optimal CNR performance
- Fiber link provides electrical isolation between antenna and facility, mitigating ground loop and lightning issues
- The 7706LT occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone
- Fiber Optic Connector Type - SC-SC
- Fiber Optic Connector Type - ST-ST
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Number of RF Inputs: 1
- RF connector: BNC per IEC 61169-8 Annex A (F-Type and SMA Optional)
- RF Input Impedance: 75ohm (50ohm Optional)
- Frequency Range: 850 to 3000 MHz
- Return Loss: 850MHz - 2.3GHz > 14dB, 2.3GHz - 3GHz > 12dB
- Input Power Range: -10 to -60 dBm
- AGC Gain Range: -10 to +30dB, adjustable
- IMD: < -55dBc at -15dBm input and 0dB gain
- Input IP3: +10 dBm
- LNB Power Voltage: 13V DC, 18V DC, off (selectable)
- LNB Power Current: 400 mA
- LNB Power Protection: Short Circuit, current limited
- LNB Power LO Control: 22kHz on/off (selectable)
- Number of RF Monitor Outputs: 1
- RF Monitor Connector: BNC per IEC 61169-8 Annex A (F-Type and SMA Optional)
- RF Monitor Output Impedance: 75ohm (50ohm Optional)
- RF Monitor Return Loss: > 15dB
- RF Monitor Frequency Range: 850 to 3000 MHz
- Output Level: Within -2.0dB of input signal
- Number of Optical Outputs: 1
- Operating wavelength: 1310 Nm
- Output Power: +2 dBm
- Frequency Response: 950MHz - 2150MHz ±1.5dB, 850MHz - 3GHz ±2dB, 36MHz BW to 2.3GHz ±0.25dB
- Power: 6 watts max, excluding LNB Power
- Number of Slots: 1
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with 24 CFR 1040.10 and 1040.11, FCC Part 15, EU EMC Directive
Wideband RF Fiber Transmitter
36 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7706LT13
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page