top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Analog, SDI or HD Video with AES Audio Fiber Transmitter 1310nm, FP laser
Model: 7707ADVT13-HD
- Single card fiber optic transmitter for one composite analog or SDI video and four analog or AES signals
- Auto-sensing (analog or digital) video and audio inputs
- Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
- Supports HD (SMPTE ST 292-1) video @ 1.485Gb/s
- Supports both NTSC and PAL analog, or 4:2:2 component digital video
Product Info
Tech Specs
Documents
The 7707ADVT13-HD is a Analog, SDI or HD Video with AES Audio Fiber Transmitter 1310nm, FP laser. Fully hot-swappable from front of frame with no fiber disconnect/reconnect required. Supports single-mode and multi-mode fiber optic cable.
- Single card fiber optic transmitter for one composite analog or SDI video and four analog or AES signals
- Auto-sensing (analog or digital) video and audio inputs
- Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
- Supports HD (SMPTE ST 292-1) video @ 1.485Gb/s
- Supports both NTSC and PAL analog, or 4:2:2 component digital video
- Supports Analog to Digital and Digital to Analog audio conversion
- Broadcast quality analog video and audio performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
- Supports 32, 44.1, 48KHz AES audio inputs
- Dolby E™ compatible
- Adjustable gain equalization for analog video for up to 250m of Belden 1694 coaxial cable
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single-mode and multi-mode fiber optic cable
- Optical output wavelengths of 1310nm, 1550nm and up to 16 CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Analog Video Input Standard: NTSC (SMPTE ST 170), PAL (ITU-R 624-2)
- Analog Video Input Number of Inputs: 1
- Analog Video Input Connector: BNC per IEC 61169-8 Annex A
- Analog Video Input Signal Quantization: 12 bits
- Analog Video Input System Bandwidth: > 5.5MHz
- Analog Video Input Level: 2V p-p (maximum)
- Analog Video Input Gain Equalization: Up to 250m of Belden 1694 or equivalent (adjustable)
- Analog Video Input Impedance: 75?
- Analog Video Input Return Loss: > 30dB to 5.5MHz
- Analog Video Input SNR: > 70dB
- Analog Video Input Differential Gain: < 1.0%
- Analog Video Input Differential Phase: < 0.7°
- Analog Video Input Passband Ripple:
- Analog Video Input NTSC: < ±0.1dB to 4.1MHz
- Analog Video Input: < ±0.2dB to 5.5MHz
- Analog Video Input PAL: < ±0.1dB to 4.8MHz
- Analog Video Input Chroma/Luma Gain: 98% to 103%
- Analog Video Input Chroma/Luma Delay:
- Analog Video Input Line Time Distortion: 0.012
- Standard: Same as Analog Video Input
- Analog Video Output Number of Outputs: 1
- Analog Video Output Connector: BNC per IEC 61169-8 Annex A
- Analog Video Output Level: 1V p-p
- Analog Video Output Impedance: 75?
- Analog Video Output Return Loss: > 30dB to 5.5MHz
- Serial Video Output Number of Outputs: 2 (1 loopback, 1 serial)
- Serial Video Output Connector: BNC per IEC 61169-8 Annex A
- Serial Video Output Signal Level: 800mV nominal
- Serial Video Output DC Offset: 0V ±0.5V
- Serial Video Output Rise/Fall Time: 900ps nominal @ 270Mb/s
- Serial Video Output: < 270ps @ 1.485Gb/s
- Analog Audio Input Number of Inputs: 4
- Analog Audio Input Type: Balanced analog audio
- Analog Audio Input Connector: 12-pin removable terminal block
- Analog Audio Input Impedance: High Impedance (> 20k?)
- Analog Audio Input Frequency Response: ±0.1dB, 20Hz to 20kHz
- Analog Audio Input THD: < 0.005%, 20Hz to 20kHz
- Analog Audio Input Channel Phase Differential: ±1°
- Analog Audio Input SNR (weighted): > 85dB
- Analog Audio Input Maximum Input Level: +24dBu
- Analog Audio Input Signal Quantization: 24 bits
- Optical Output Number of Outputs: 1
- Optical Output Return Loss: > 14dB
- Optical Output Rise/Fall Time: 200ps nominal
- Optical Output Fiber Size: 9µm core / 125µm overall
- Optical Output Wavelength:
- Optical Output Standard: 1310nm, 1550nm (nominal)
- Optical Output 1310nm FP (Standard): -7dBm ±1dBm
- Voltage: +12V DC
- Power: 16 Watts (Non-DWDM) or 19 Watts (DWDM)
- Number of Slots: 1
- Laser Safety: Class 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1
- EMI/RFI: Complies with FCC Part 15, Class A, EU EMC Directive
- Active Power: 16 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: FCC Part 15, Class A, EU EMC Directive (EMI/RFI), Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1,
4 Channel Analog or AES Audio Fiber Transmitter
82 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7707ADVT13-HD
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page