top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8-channel Analog Video Fiber Optic Transmitter
Model: 7707CVT-8
- Single card fiber optic transmitter for up to eight analog video signals
- Supports both NTSC and PAL video signals
- Broadcast quality analog video performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
- Signal transport over fiber is uninterrupted by loss of input video feeds
Product Info
Tech Specs
Documents
The 7707CVT-8 is a VistaLINK-capable, composite analog video fiber transmitter for broadcast quality video signals. This single card module accepts up to eight NTSC or PAL analog video inputs, performs analog to digital conversion and transmits them over a single fiber. The companion 7707CVR-8 Analog Video Fiber Receiver demultiplexes the signals and converts them back to analog form. The fiber optic output of the 7707CVT-8 is available in an assortment of optical wavelengths, accommodating 1310nm/1550nm, CWDM and DWDM transmission schemes. The 7707CVT-8 occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Single card fiber optic transmitter for up to eight analog video signals
- Supports both NTSC and PAL video signals
- Broadcast quality analog video performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
- Signal transport over fiber is uninterrupted by loss of input video feeds
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK
- VistaLINK capable for remote monitoring via SNMP (using VistaLINK PRO) when installed in 7800FR frame with a 7700FC VistaLINK frame controller
- Adjustable equalization for up to 250m of Belden 1694A coaxial cable
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single-mode and multi-mode fiber optic cable
- Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Certifications: FCC
- Signal to Noise Ratio: 70 dB
- DC Voltage: 12 Volts
- Number of Multimode Inputs: 8
- Number of Multimode Outputs: 1
- Regulatory Compliance: EU EMC
Fiber Optic Transmitter
55 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7707CVT-8
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page