top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Analog Video with 4-Channel Analog Audio Fiber Transmitter, CWDM DFB Laser
Model: 7707CVTAxx
- Single card fiber multiplexor for one or two analog video and four analog audio signals
- Supports both NTSC and PAL
- Broadcast quality analog video and audio performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
- Superior digital data transmission
Product Info
Tech Specs
Documents
The 7707CVTAxx is a VistaLINK® capable, composite analog video and analog audio fiber transmitter for broadcast quality video and analog audio signals.This single card module accepts one NTSC or PAL analog video input with up to four analog audio inputs, performs analog to digital conversion and transmits them over a single fiber. The companion 7707CVRA Composive Video and Analog Audio Fiber Receiver demultiplexes the signals and converts them back to analog form.
- Single card fiber multiplexor for one or two analog video and four analog audio signals
- Supports both NTSC and PAL
- Broadcast quality analog video and audio performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
- Superior digital data transmission
- Video loop-through for additional signal distribution or monitoring (7707CVTA only)
- Signal transport over fiber uninterrupted by loss of input video or audio feeds
- Low Audio to Video latency
- Comprehensive Signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Adjustable gain equalization for up to 250m of Belden 1694 coaxial cable
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single mode and multi-mode fiber optic cable
- Optical output wavelengths at 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- DC Voltage: 12 Volts
- Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
- Analog Video Input Standard: NTSC, SMPTE ST 170, PAL ITU-R624-4
- Analog Video Input Number of Inputs 7707CVTA: 1
- Analog Video Input Number of Inputs 7707CVTA-2: 2
- Analog Video Input Connector: BNC per IEC 61169-8 Annex A
- Analog Video Input Signal Quantization: 12 bits
- Analog Video Input System Bandwidth: 5.5 MHz
- Analog Video Input Level: 2 V p-p (maximum)
- Analog Video Input Gain Equalization: Up to 250m of Belden 1694 or equivalent (adjustable)
- Analog Video Input Impedance: 75 ohm
- Analog Video Input Return Loss: > 30dB to 5.5MHz
- Analog Video Input SNR: > 70 dB
- Analog Video Input Differential Gain: < 1.0%
- Analog Video Input Differential Phase: < 0.7°
- Analog Video Input Passband Ripple:
- Analog Video Input NTSC: < ±0.1dB to 4.1 MHz
- Analog Video Input: < ±0.2dB to 5.5 MHz
- Analog Video Input PAL: < ±0.1dB to 4.8 MHz
- Analog Video Input Chroma/Luma Gain: 98% - 103 %
- Analog Video Input Chroma/Luma Delay:
- Analog Video Input NTSC: < 5ns
- Analog Video Input PAL: < 12ns
- Analog Video Input Line Time Distortion: 1.2 %
- Analog Video Output 7707CVTA Only:
- Analog Video Output Standard: NTSC, SMPTE ST 170, PAL ITU-R624-4
- Analog Video Output Number of Outputs: 1 buffered version of input
- Analog Video Output Connector: BNC per IEC 61169-8 Annex A
- Analog Video Output Level: 1 V p-p
- Analog Video Output Impedance: 75 ohm
- Analog Video Output Return Loss: > 30dB to 5.5MHz
- Analog Audio Input Number of Inputs: 4
- Analog Audio Input Type: Balanced analog audio
- Analog Audio Input Connector: 12 pin removable terminal block
- Analog Audio Input Impedance: High Impedance (> 20k?)
- Analog Audio Input Frequency Response: ±0.1dB (20Hz to 20KHz)
- Analog Audio Input THD: < 0.005% (20Hz to 20kHz)
- Analog Audio Input Channel Phase Differential: < ±1°
- Analog Audio Input SNR: > 85 dB (weighted)
- Analog Audio Input Maximum Input Level: +24dBu
- Analog Audio Input Signal Quantization: 24 bits
- Optical Output Number of Outputs: 1
- Optical Output Connector: SC/PC, ST/PC, FC/PC female housing
- Optical Output Return Loss: > 14 dB
- Wavelengths Standard: 1310, 1550 Nm (nominal)
- Output Power 1310nm FP (Standard): -7dBm ±1dBm
- Output Power 1550 & CWDM DFB: 0dBm ±1dBm
- Output Power DWDM DFB: +7dBm ±1dBm
- Output Power System Performance: 7707CVTA + 7707CVRA or 7707CVTA-2 + 7707CVRA-2
- Video Input to Output Delay: < 10 µs
- Audio Input to Output Delay: < 1.9 ms
- Wavelengths CWDM: 1270,1290,1310,1330,1350,1370,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610 Nm
4-Channel Analog Audio Fiber Transmitter
73 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7707CVTAxx
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page