top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Multi RS-232/RS-422 and GPIO Fiber Data Transceiver, Single Fiber, WDM, 1310nm FP TX, RX on 1550nm, VistaLINK®
Model: 7707DT13M-W-GPIO
- 7707DT-GPIO version provides five additional RS-232 and eight additional General Purpose Input/Outputs (GPIO)
- Selectable termination and failsafe bias settings for RS-422/485 data inputs
- Selectable network timeouts for RS-485 accommodate twelve data rates
- All configuration settings are controllable through the card-edge user interface, or VistaLINK®
- Comprehensive signal and status monitoring via four-digit card-edge display, or VistaLINK®
Product Info
Tech Specs
Documents
The 7707DT series Fiber Data Transceivers provide an economical method of transmitting multiple bi-directional RS-232, RS-422, RS-485 data signals as well as Linear Time Code (LTC) over a single fiber optic link. The 7707DT-GPIO version provides additional RS-232 and General Purpose Input/Outputs (GPIO). A pair of 7707DT Data Transceivers permits bi-directional data transmission over distances up to 100 Km, with minimum possible latency. Single and dual fiber(-F2) optical interface configurations allow the user to choose the optimal function/price/performance ratio to suit a particular application. The dual fiber configuration is compatible with CWDM/DWDM systems and is designed to transmit and receive over separate fibers. The optical output of the 7707DT is available in 1310nm wavelength. The 7707DT-GPIO occupies two card slots. Both can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- 7707DT-GPIO version provides five additional RS-232 and eight additional General Purpose Input/Outputs (GPIO)
- Selectable termination and failsafe bias settings for RS-422/485 data inputs
- Selectable network timeouts for RS-485 accommodate twelve data rates
- All configuration settings are controllable through the card-edge user interface, or VistaLINK®
- Comprehensive signal and status monitoring via four-digit card-edge display, or VistaLINK®
- Optical output wavelengths of 1310nm
- Supports with multi-mode and single-mode fiber (dual fiber version)
- SC/PC, ST/PC, or FC/PC
- fiber connector options
- Fully hot swappable from front of frame
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
- Fiber Optic Connector Type - SC-SC
- Fiber Optic Connector Type - ST-ST
- Fiber Optic Signals Supported - RS-232
- Spec Sheet available - Yes
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, EU EMC Directive
- RS-422/485 Number of Signals: 4 inputs/outputs
- RS-422/485 Connector: Multi-pin removable terminal block
- RS-422/485 Type: RS-485 or RS-422 (selectable)
- RS-422/485 Input Termination: 110ohm or Open (selectable)
- RS-422/485 Input Failsafe Bias: 200mV (3.3mA into 60ohm) or None (selectable)
- RS-422/485 Bit Rate: 460kb/s (RS-422), 1.2kb/s, 2.4kb/s, 4.8kb/s, 9.6kb/s, 19.2kb/s, 38.4kb/s, 57.6kb/s, 76.8kb/s, 115kb/s, 153kb/s, 230kb/s or 460kb/s (selectable) (RS-485)
- RS-232 Number of Signals: 8 inputs/outputs
- RS-232 Connector: Multi-pin removable terminal block
- Type: RS-232
- RS-232 Maximum Bit Rate: 115 kB/s
- LTC Number of Signals: 1 input/output
- LTC connector: Multi-pin removable terminal block
- LTC Signal Type: SMPTE ST 12-1 Linear Time Code
- LTC Rise/Fall Time: 40µs ±10µs
- LTC Input Level: 0.2V to 4V p-p (balanced or unbalanced)
- LTC Output Level: 1V p-p nominal (balanced)
- General Purpose Inputs Type: Opto-isolated, Active low
- General Purpose Number of Inputs: 8
- General Purpose Inputs Connector: Multi-pin removable terminal block
- General Purpose Inputs Voltage: -20 to +10 V (Safe Voltage Range), +3.5V (Off Condition (min)), +2.5V (active low) (On Condition (max))
- Current: 1mA (Min), 10mA (internally limited) (Max)
- General Purpose Output Type: Dry contact relay closure, normally open
- General Purpose Number of Outputs: 8
- General Purpose Connector: Multi-pin removable terminal block
- General Purpose Minimum Current: 100 mA
- Optical Input / Output Connector: 1 Bi-directional optical connector - SC/PC, ST/PC or FC/PC female housing
- Maximum Input Power: 0 dBm
- Input Optical Sensitivity: -26 dBm
- Wavelengths: 1310nm
- Optical Output Power: 1310nm -1dBm ±1dBm
- Power: 6 W
Multi RS-232 / RS-422 / RS-485 / GPIO Fiber Data Transceiver
91 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7707DT13M-W-GPIO
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page