70/140MHz IF Fiber Transmitter, with VistaLINK® 1550nm DFB Laser

Model: 7707IFTA15

30-200MHz bandwidth
Wide dynamic range RF input (-5 to -65dBm)
Protocol transparent - transmits all video, audio and data modulation formats
Supports manual and automatic gain control on IF input
Additional electrical output for monitoring or distribution

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707IFTA15 is a VistaLINK® capable fiber optic transmitter for 70/140MHz IF signals. The 7707IFTA15 accepts one 70/140MHz coaxial input and provides a fiber optic output signal at 1310nm, 1550nm, CWDM or DWDM wavelengths. An additional electrical output is also provided for monitoring or further signal distribution. Monitoring and control of card status and parameters is provided locally at the card edge and remotely via VistaLINK®.The 7707IFTA occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

30-200MHz bandwidth
Wide dynamic range RF input (-5 to -65dBm)
Protocol transparent - transmits all video, audio and data modulation formats
Supports manual and automatic gain control on IF input
Additional electrical output for monitoring or distribution
Available with BNC or F-Type connector options
Available with output wavelengths of 1310nm, 1550nm, CWDM (ITU-T G.694.2 compliant) and DWDM (ITU-T G.694.1 compliant)
Supports single-mode and multi-mode fiber optic cable
Available in SC/PC, ST/PC, FC/PC and APC connector options
Fully hot swappable from front of frame
Comprehensive signal and status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 200000 kHz
Maximum Frequency Response (Bandwidth): 200000000 Hz
Minimum Frequency Response (Bandwidth): 30000 kHz
Minimum Frequency Response (Bandwidth): 30000000 Hz
Active Power: 6 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
IF Input Number of Inputs: 1
IF Input Connector: BNC per IEC 61169-8 Annex A (F-Type optional)
IF Input I/O Impedance: 75 ohm 50 ohm (+50 option)
IF Input Return Loss: 18 dB (min)
IF Input Frequency Range: 30MHz - 200MHz
IF Input Input Power Range: -5dBm to -65dBm
IF Input AGC Hold Range: -10dBm to -35dBm
IF Monitoring Output Number of Outputs: 1
IF Monitoring Output Connector: BNC per IEC 61169-8 Annex A (F-Type optional)
IF Monitoring Output I/O Impedance: 75 or 50 ohm (+50 option)
IF Monitoring Output Return Loss: 18dB (min)
IF Monitoring Output Frequency Range: 30MHz - 200MHz
IF Monitoring Output Flatness: ±1dB @ 30MHz - 200MHz; ±0.2dB @ 36MHz BW
Signal Level AGC mode: -20dBm constant (within AGC range, -10 to -35dBm total RF input power)
Signal Level Manual mode: (input signal) + (manual gain setting)
Signal Level Intermodulation Products: -50dBc (-10dBm RF in, AGC mode)
Optical Output Number of Outputs: 1
Optical Output Connector: Female SC/PC, ST/PC, FC/PC, SC/APC, FC/APC
Wavelength Standard: 1310nm, 1550nm nominal
Wavelength CWDM: 1270nm to 1610nm
Wavelength DWDM: C-Band (ITU-T G.694.1 compliant)
Optical Power 1310nm FP: 0dBm ±1dBm
Optical Power 1310nm, 1550nm & CWDM DFB: +2dBm ±1dBm
Optical Power DWDM DFB: +7dBm ±1dBm
Electrical Voltage: +12 V DC
Electrical Power: 6 Watts (Non-DWDM) or 9 Watts (DWDM)
Physical Number of Slots: 1

IF Fiber Transmitter 55 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page