top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
SDI, 2 AES Audio, Bi-Directional RS-232/422, 2 GPI & 2 GPO, Fiber Transmitter, Dual Fiber, DWDM DFB laser
Model: 7707MTDxxx-F2
- SDI video, 2 AES audio, 1 bi-directional RS-232/422 and 2 GPI/O fiber optic transmitter
- Supports 525 or 625 line 4:2:2 component SDI signals
- Supports SDTi signals
- Supports 32, 44.1, 48 KHz AES audio inputs
- Dolby E compatible
Product Info
Tech Specs
Documents
The 7707MT Multi-Signal Fiber Transmitter is a VistaLINK® capable, fiber transmitter for SDI Video, AES Audio, RS-422 control and GPI/O. This single card module transports one uni-directional SDI Video, two uni-directional AES Audio, one bi-directional RS-422 and two bi-directional GPI's and GPO's. These signals are combined using Time Domain Multiplex (TDM) technology and transmitted over a single fiber. The companion 7707MR Multi-Signal Fiber Receiver demultiplexes the signals and converts them back to their original formats. The 7707MT and companion 7707MR will transparently pass incoming SDI video feeds with embedded AES audio or any other data in the horizontal or vertical ancillary data space. Minimal Audio to Video latency over the transport interface is also achieved. The fiber output is available in an assortment of optical wavelengths, accommodating 1310/1550nm, CWDM and DWDM transmission schemes. The 7707MT occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- SDI video, 2 AES audio, 1 bi-directional RS-232/422 and 2 GPI/O fiber optic transmitter
- Supports 525 or 625 line 4:2:2 component SDI signals
- Supports SDTi signals
- Supports 32, 44.1, 48 KHz AES audio inputs
- Dolby E compatible
- Supports bi-directional RS-422 signals at baud rates up to 3Mb/s
- AES audio inputs can be synchronous or asynchronous to each other and/or to input video
- Reclocked SDI output for additional signal distribution
- Signal transport over fiber uninterrupted by loss of input SDI, AES, Serial Data or GPI/O feeds
- Low Audio to Video latency over transport interface
- Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
- Local display of optical signal strength, video, audio, and data presence, video and AES formats, EDH errors, GPI and GPO status
- Automatic coaxial input equalization to 300m at 270Mb/s (Belden 1694)
- Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
- Bi-directional optical input/output
- Accepts any wavelength in the 1270nm to 1610nm range
- Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Supports single-mode and multi-mode fiber optic cable
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Number of Singlemode Inputs: 1
- Active Power: 14 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: FCC Part 15, Class A, EU EMC Directive
- Serial Video Input::
- Standard: SMPTE ST 259-C, SMPTE ST 305
- Number of Inputs: 1
- Connector: BNC per IEC 61169-8 Annex A
- Equalization: Automatic to 300m @ 270Mb/s with Belden 1694 or equivalent cable
- Return Loss: > 15 dB up to 270Mb/s
- Serial Video Output::
- Number of Outputs: 1 reclocked
- Signal Level: 800 mV nominal
- DC Offset: 0 V ±0.5V
- Rise/fall Time: 900 ps nominal
- Overshoot: < 10 % of amplitude
- Wideband jitter: < 0.2 UI
- AES Audio Input::
- Balanced: AES3-1992
- Unbalanced: SMPTE ST 276
- Other: Dolby E compatible
- Signal Level Balanced: 2V to 7V p-p with level jumper set to HI, 1V to 2V p-p with level jumper set to LO
- Signal Level Unbalanced: 1V p-p ±0.1V
- Resolution: Up to 24 bits
- Sampling Rate: 32, 44.1, 48kHz
- Intrinsic Jitter: < 20ns
- Impedance Balanced: 110 ohms
- Impedance Unbalanced: 75 ohms
- General Purpose Inputs::
- Type: Opto-isolated, active low with internal pullups to +5V or +12V (jumper selectable)
- Signal Drive Level: Open or closure to ground
- General Purpose Outputs::
- Signal Level: Normally closed or normally open (jumper selectable)
- Serial Data Input/Output::
- Number of Ports: 1 (RS-422) or 2 (RS-232)
- Baud Rate: Up to 3Mb/s for RS-422 (Determined by incoming data)
- System Performance::
- Video Input to Output Delay: < 1.5 µs
- Audio to Video Delay::
- Softswitch™ Disabled (7707MR): < 1 µs
- Softswitch™ Enabled (7707MR): < 2 ms
- Optical Input / Output::
- Number of Connections: 1 (single fiber version) or 2 (-F2 dual fiber version)
- Maximum Input Power: 0 dBm
- Input Wavelength: 1270nm to 1610nm
- Physical::
- Number of Slots: 1
SDI, 2 AES Audio, Bi-Directional
82 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7707MTDxxx-F2
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page