Optical Regenerator/Wavelength Converter for Rates to 540Mb/s, 1270nm to 1610nm Input, CWDM Output

Model: 7707OOxx

Can be used as an optical regenerator/repeater, E to O converter, O to E converter, O to O wavelength converter
Auto-rate selection, reclocking and indication for all SMPTE ST 259 standards from 143-540Mb/s
Supports additional standards of SMPTE ST 305(SDTi), SMPTE ST 310 (19.4Mb/s) and M2S or DVB-ASI(270Mb/s)
Can also support Datacom/Telecom rates up to 540Mb/s
Coaxial or optical input (jumper selectable)

Compare

Project List

Product Info

Tech Specs

Documents

Optical Regenerator / Wavelength Converter for Rates to 540Mb/s, 1270nm to 1610nm Input, CWDM Output.

Can be used as an optical regenerator/repeater, E to O converter, O to E converter, O to O wavelength converter
Auto-rate selection, reclocking and indication for all SMPTE ST 259 standards from 143-540Mb/s
Supports additional standards of SMPTE ST 305(SDTi), SMPTE ST 310 (19.4Mb/s) and M2S or DVB-ASI(270Mb/s)
Can also support Datacom/Telecom rates up to 540Mb/s
Coaxial or optical input (jumper selectable)
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Independent isolated output drivers to ensure no cross channel loading effects and to maintain polarity from input to output for DVB-ASI applications
Comprehensive signal and card status monitoring via four digit card edge display
Detection and display of optical input power, video format and EDH errors
Fully hot-swappable from front of frame
Two BNC serial digital outputs
Wide range optical input (1270nm - 1610nm)

Optical Input Standard: SMPTE ST 259 A, B, C, D, SMPTE ST 297, SMPTE ST 305, SMPTE ST 310, DVB-ASI, M2S
Optical Number of Inputs: 1
Optical Input Connector: SC/PC, ST/PC, FC/PC female housing
Operating wavelength: 1270 to 1610 Nm
Maximum Input Power: 0 dBm
Optical Sensitivity: -31 dBm
Electrical Video Input Standard: SMPTE ST 259 (143 to 540Mb/s) or DVB/ASI (Normal), SMPTE ST 310 (19.4Mb/s) (Jumper Selected)
Number of Video Inputs: 1
Electrical Video Input Connector: BNC per IEC 61169-8 Annex A
Equalization: Automatic to 275m @ 270Mb/s with Belden 8281 (or equivalent)
Video Input Return Loss: > 15dB up to 540Mb/s
Number of Optical Outputs: 1
Optical Output Connector: SC/PC, ST/PC, FC/PC female housing
Optical Output Return Loss: > 14dB
Jitter: < 0.15UI (Reclocked), < 0.20UI (Non-reclocked)
CWDM Wavelength: 1270 to 1610 Nm
Optical Power: CWDM DFB 0dBm ±1dBm
Number of Video Outputs: 2 reclocked (both outputs maintain polarity from input to output for DVB-ASI applications)
Electrical Video Output Connector: BNC per IEC 61169-8 Annex A
Electrical Video Output Impedance: 75ohm (nominal)
Electrical Video Output Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise/fall Time: 900ps nominal
Overshoot: < 10% of amplitude
Electrical Video Output Return Loss: > 15dB up to 540Mb/s
Wideband jitter: < 0.15UI (Reclocked), < 0.20UI (Non-reclocked)
Power: 6 W
Number of Slots: 1
DC Voltage: 12 Volts
Regulatory Compliance: Complies with 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, EU EMC Directive

Optical Regenerator / Wavelength Converter 49 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page