top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Dual S-Video Fiber Transmitter, 1310nm FP Laser, VistaLINK®
Model: 7707SVT13-2
- Single card fiber multiplexor for up to two S-Video signals
- Supports both NTSC and PAL
- Broadcast quality analog video performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
- Superior digital data transmission
Product Info
Tech Specs
Documents
The 7707SVT13-2 is a VistaLINK® capable S-Video fiber transmitter for broadcast quality signals. This single card module accepts two S-Video inputs, performs analog to digital conversion and transmits them over a single fiber. The companion 7707SVR-2 S-Video Fiber Receiver demultiplexes the signals and converts them back to analog form.The fiber output of the 7707SVT-2 is available in an assortment of optical wavelengths accomodating 1310nm/1550nm, CWDM and DWDM transmission schemes.The 7707SVT-2 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Single card fiber multiplexor for up to two S-Video signals
- Supports both NTSC and PAL
- Broadcast quality analog video performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
- Superior digital data transmission
- Signal transport over fiber uninterrupted by loss of input video feeds
- Comprehensive Signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single mode and multi-mode fiber optic cable
- Optical output wavelengths at 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Signal to Noise Ratio: 70 dB
- Active Power: 0.92 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: Class 1 laser product, Complies with 24CFR 1040.10 and 1040.11 IEC 60825-1,Complies with FCC Part 15 Class A, EU EMC Directive
- Analog S-Video Input Standards: NTSC, SMPTE ST 170, PAL, ITU-R 624-4
- Analog S-Video Number of Inputs: 2
- Analog S-Video Input Connector: IEC 933-5 (4-pin mini-DIN)
- Analog S-Video Input Signal Quantization: 12 bits
- Analog S-Video Input System Bandwidth: 5.5 MHz
- Analog S-Video Input Input Level: Y: 1.0V p-p, C: 0.286V p-p
- Analog S-Video Input Input Impedance: 75 ohm
- Analog S-Video Input Return Loss: > 30 dB to 5.5MHz
- Analog S-Video Input Signal/Noise Ratio: > 70 dB
- Analog S-Video Input Differential Gain: < 1.0 %
- Analog S-Video Input Differential Phase: < 0.7 deg
- Analog S-Video Input Passband Ripple NTSC: < ±0.1dB to 4.1MHz, < ±0.2dB to 5.5MHz
- Analog S-Video Input Passband Ripple PAL: < ±0.1dB to 4.8MHz, < ±0.2dB to 5.8MHz
- Analog S-Video Input Line Time Distortion: 1.2 %
- Optical Output: 1
- Optical Output Return Loss: > 14 dB
- Output Power 1310nm FP (Standard): -7 ±1 dBm
- System Performance Video Input to Output Delay: < 10 micro s
- Number of Slots: 1
Fiber Transmitter
82 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7707SVT13-2
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page