8-Channel 3G/HD/SDI/DVB-ASI + Ethernet SONET / SDH Fiber Transceiver, 1550nm XFP Laser

Model: 7707VB-8-HS-OC192+15S

Interfaces directly to SONET (OC-192) or SDH (STM-64) infrastructure
Flexibility to combine video and Ethernet signals to fill SONET/SDH capacity in each direction: Six HD-SDI signals, plus one SDI/DVB-ASI or 10/100/1000 (FBM) Ethernet, Five HD-SDI signals, plus two SDI/DVB-ASI and 10/100/1000 (FBM) Ethernet, Four HD-SDI si
Other combinations up to Eight SDI/DVB-ASI, plus 10/100/1000 (full bandwidth) Ethernet
Full-rate, uncompressed, asynchronous video channels with wide tolerance (±50ppm)
Flexible Bandwidth Management (FBM) to control Ethernet bandwidth allocation

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

This eight channel 3G/HD/SDI/DVB-ASI + ethernet SONET / SDH fiber transceiver interfaces directly to SONET (OC-192) or SDH (STM-64) infrastructure.

Interfaces directly to SONET (OC-192) or SDH (STM-64) infrastructure
Flexibility to combine video and Ethernet signals to fill SONET/SDH capacity in each direction: Six HD-SDI signals, plus one SDI/DVB-ASI or 10/100/1000 (FBM) Ethernet, Five HD-SDI signals, plus two SDI/DVB-ASI and 10/100/1000 (FBM) Ethernet, Four HD-SDI si
Other combinations up to Eight SDI/DVB-ASI, plus 10/100/1000 (full bandwidth) Ethernet
Full-rate, uncompressed, asynchronous video channels with wide tolerance (±50ppm)
Flexible Bandwidth Management (FBM) to control Ethernet bandwidth allocation
One loopback (output channel eight), user selectable for monitoring of inputs/outputs
Pluggable XFP fiber module permits wavelength swapping/sparing
SONET/SDH jitter performance with Stratum 3 clocking
Comprehensive signal and card status monitoring via four-digit card-edge display
VistaLINK® enabled for remote monitoring/control, with two possible interface methods: Using local Ethernet connection on rear-plate (has local SNMP Agent), Using 7700FC VistaLINK® Frame Controller installed in 7700FR-C frame
Automatic coaxial equalization up to 70m at 2.97Gb/s, 100m at 1.485Gb/s, and 250m at 270Mb/s (Belden 1694A or equivalent cable)
Fully hot-swappable from front (main board) and rear (XFP fiber module) of frame
Optical output wavelengths of 1310nm and 1550nm
Female LC Duplex fiber connector

Spec Sheet available - Yes

Serial Video Input - Standards: SMPTE ST 259-C, SMPTE ST 292-1, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video - Number of Inputs: 8
Serial Video Input - Connector: 1 BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization: Automatic to 70m @ 2.97Gb/s, 100m @ 1.485Gb/s, and 250m @270Mb/s with Belden 1694A or equivalent
Serial Video Input - Return Loss: > 15dB up to 1.5GHz; > 10dB to 3GHz
Serial Video Input - Freq Offset Tolerance: ±50 ppm
Serial Video Output - Standards: SMPTE ST 259-C, SMPTE ST 292-1 DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video - Number of Outputs: 8
Serial Video Output - Connector: 1 BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level: 800 mV nominal
Serial Video Output - DC offset: 0V ±0.5V
Serial Video Output - Rise and Fall Time: < 135ps (HD/3G); < 900ps (SD)
Serial Video Output - Overshoot: < 10% of amplitude
Serial Video Output - Return Loss: > 15dB to 1.5GHz; > 10dB to 3GHz
Serial Video Output - Alignment Jitter: < 0.2UI (Reclocked) to 1.485Gb/s; < 0.3UI (Reclocked) to 2.97Gb/s
Optical Output - Number: 1
Optical Output - Standard: OC-192C/STM-64
Optical Output - Connector: Female LC Duplex
Optical Output - Return Loss: > 12 dB
Optical Output - Fiber Size: 9µm core/125mm overall
Optical Output - Wavelengths: 1310nm, 1550nm
Optical - Number of Inputs: 1
Optical Input - Standard: OC-192C/STM-64
Optical Input - Connector: Female LC Duplex
Optical Input - Operating Wavelength: 1310nm and 1550nm
Optical Input - Maximum Input Power: -1 dBm
Optical Input - Optical Sensitivity: -11 dBm
Number of Slots: 3
Electrical Safety: CSA Listed to CSA C22.2 No. 60065-03 IEC 60065-(2001-12) 7th Edition; Complies with CE Low voltage directive 93/68/EEC
Laser Safety: Complies with 24 CFR 1040.10 and 1040.11 except for deviations pursuant to LN No. 50, dated July 26, 2001; Complies with IEC 60825-1, Am. 2
Active Power: 25 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive

7707VB-8-HS-OC192+13S - 8-Channel 3G/HD/SDI/DVB-ASI + Ethernet SONET / SDH Fiber Transceiver, 1310nm XFP Laser

Eight Channel 3G/HD/SDI/DVB-ASI + Ethernet SONET / SDH Fiber Transceiver 54 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page