top of page

Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 7707VBDxxx-3-HS-OC48

evertz

Triple HD/SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver, DWDM DFB Laser

Model: 7707VBDxxx-3-HS-OC48

Transports signals at the OC-48/STM-16 rate
Single card TDM multiplexer for three bi-directional asynchronous HD-SDI, SDI, DVB-ASI & SDTi signals
Built-in Ethernet transceiver with 10/100/1000 Base-T compatible port with FBM (Flexible Bandwidth Management) technology
Interfaces directly to the SONET/SDH infrastructure
Signal transport over fiber uninterrupted by loss of any input feed

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

This triple HD/SDI/ASI/SDTi + ethernet SONET/SDH fiber transceiver transports signals at the OC-48/STM-16 rate. It interfaces directly to the SONET/SDH infrastructure.

Transports signals at the OC-48/STM-16 rate
Single card TDM multiplexer for three bi-directional asynchronous HD-SDI, SDI, DVB-ASI & SDTi signals
Built-in Ethernet transceiver with 10/100/1000 Base-T compatible port with FBM (Flexible Bandwidth Management) technology
Interfaces directly to the SONET/SDH infrastructure
Signal transport over fiber uninterrupted by loss of any input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Stratum 3 wander/holdover/jitter compliance
Wide input frequency range tolerance (±50ppm)
Fully hot-swappable from front of frame
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies two card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity

Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Serial Video - Number of Inputs: 3
Serial Video Input - Standards: Input 1: SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi); Inputs 2 and 3: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization: Automatic to 100m @ 1.485Gb/s and 250m @ 270Mb/s with Belden 8281 or equivalent cable
Serial Video Input - Return Loss: > 15dB up to 1.5Gb/s
Serial Video Input - Frequency Offset Tolerance: ±50 ppm
Serial Video - Number of Outputs: 3 +2 monitor with user selectable source
Serial Video Outputs - Standards: Output 1 and Monitor 1 and 2: SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi); Output 2 & 3: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Outputs - Connector: BNC per IEC 61169-8 Annex A
Serial Video Outputs - Signal Level: 800 mV nominal
Serial Video Outputs - DC Offset: 0V ±0.5V
Serial Video Outputs - Rise and Fall Time: 150ps nominal @ 1.485Gb/s, 600ps nominal @ 270Mb/s
Serial Video Outputs - Overshoot: < 10% of amplitude
Serial Video Outputs - Return Loss: > 15dB up to 1.5Gb/s
Serial Video Outputs - Alignment Jitter: < 0.2 UI
Number of Slots: 2
Active Power: 28 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive

7707VB15-3-HS-OC48 - Triple HD/SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver, 1550nm DFB Laser

7707VBxx-3-HS-OC48 - Triple HD/SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver, CWDM DFB Laser

Triple HD/SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver 64 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page