Quad SDI Fiber Transmitter, CWDM DFB laser

Model: 7707VTxx-4

Single card TDM multiplexer for four synchronous or asynchronous 270Mb/s SDI, SDTi or DVB-ASI video signals
Signal transport over fiber uninterrupted by loss of any SDI, SDTi or DVB-ASI input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
Automatic coaxial input equalization up to 250m at 270Mb/s (Belden 8281)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

These quad SDI fiber transmitter transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space, supports single-mode and multi-mode fiber optic cable.

Single card TDM multiplexer for four synchronous or asynchronous 270Mb/s SDI, SDTi or DVB-ASI video signals
Signal transport over fiber uninterrupted by loss of any SDI, SDTi or DVB-ASI input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
Automatic coaxial input equalization up to 250m at 270Mb/s (Belden 8281)
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure

Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Serial Video Input - Standard: SMPTE ST 259-C, SMPTE ST 305, DVB-ASI
Serial Video - Number of Inputs: 4 independent SDI or DVB-ASI 270Mb/s signals
Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization: Automatic to 250m @ 270Mb/s with Belden 8281 or \equivalent cable
Serial Video Input - Return Loss: > 15dB up to 270Mb/s
Optical - Number of Outputs: 1
Optical Output - Connector: Female SC/PC, ST/PC or FC/PC
Optical Output - Return Loss: > 14 dB
Optical Output - Rise/Fall Time: 200 ps nominal
Optical Output - Wideband Jitter: < 0.2UI
Optical Output - Fiber Size: 9µm core / 125µm overall
Optical Output - Power: 0 dBm ±1dBm
Number of Slots: 1
Active Power: 10 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive

7707VT13-4 - Quad SDI Fiber Transmitter, 1310nm FP Laser

7707VT15-4 - Quad SDI Fiber Transmitter, 1550nm DFB Laser

7707VTDxxx-4 - Quad SDI Fiber Transmitter, DWDM DFB laser

Quad SDI Fiber Transmitter 50 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page