8-Channel SDI + Ethernet SONET / SDH Fiber Transmitter, CWDM DFB Laser, High Sensitivity Receiver, VistaLINK®

Model: 7707VTxx-8-OC48-H

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

This eight channel SDI + ethernet SONET/SDH fiber transmitter transports signals at the OC-48/STM-16 rate and also supports SDTi and DVB-ASI signals.

Transports signals at the OC-48/STM-16 rate
Single card TDM multiplexer for eight asynchronous SDI signals
Also supports SDTi and DVB-ASI signals
Built-in Ethernet transceiver with one 10/100 Base-T port
Interfaces directly to the SONET/SDH infrastructure
Uncompressed, full-rate video transport
Signal transport over fiber uninterrupted by loss of any input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Stratum 3 wander/holdover/jitter compliance
Wide input frequency range tolerance (± 50ppm)
Fully hot-swappable from front of frame
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies two card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity

Serial Video Intput - Standards: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video - Number of Inputs: 8
Serial Video Intput - Connector: BNC per IEC 61169-8 Annex A
Serial Video Intput - Equalization: Automatic to 250m @ 270Mb/s with Belden 1694 or equivalent cable
Serial Video Intput - Return Loss: > 15dB up to 1.5Gb/s
Serial Video Intput - Frequency Offset Tolerance: ±50 ppm
Serial Video Monitor Output - Standards: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Monitor - Number of Outputs: 1, signal user-selectable from the 8 inputs
Serial Video Monitor Output - Connector: BNC per IEC 61169-8 Annex A
Serial Video Monitor Output - Signal Level: 800 mV nominal
Serial Video Monitor Output - DC Offset: 0V ±0.5V
Serial Video Monitor Output - Rise and Fall Time: 900 ps nominal
Serial Video Monitor Output - Overshoot: < 10% of amplitude
Serial Video Monitor Output - Return Loss: > 12 dB
Serial Video Monitor Output - Wideband Jitter: < 0.2 UI
Number of Slots: 3
Laser Safety: Complies with 24 CFR 1040.10 and 1040.11
Active Power: 10 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive

7707VT13-8-OC48 - 8-Channel SDI + Ethernet SONET / SDH Fiber Transmitter, 1310nm FP Laser, VistaLINK®

7707VT15-8-OC48 - 8-Channel SDI + Ethernet SONET / SDH Fiber Transmitter, 1550nm DFB Laser, VistaLINK®

7707VT15-8-OC48-H - 8-Channel SDI + Ethernet SONET / SDH Fiber Transmitter, 1550nm DFB Laser, High Sensitivity Receiver, VistaLINK®

7707VTDxxx-8-OC48 - 8-Channel SDI + Ethernet SONET / SDH Fiber Transmitter, DWDM DFB Laser, VistaLINK®

7707VTDxxx-8-OC48-H - 8-Channel SDI + Ethernet SONET / SDH Fiber Transmitter, DWDM DFB Laser, High Sensitivity Receiver, VistaLINK®

7707VTxx-8-OC48 - 8-Channel SDI + Ethernet SONET / SDH Fiber Transmitter, CWDM DFB Laser, VistaLINK®

Eight Channel SDI + Ethernet SONET/SDH Fiber Transmitter 70 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page