top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
HD/SD-SDI Video Delay
Model: 7743DLY-HD
- Full signal delay capability including VBI and ANC DATA for SMPTE ST 292-1 (1.5Gb/s) signals
- Also supports full signal delay capability including VBI for SMPTE ST 259 (270Mb/s) signals
- Delay programmable in video units (frames, lines and samples) or as time units (seconds)
- Auto senses video standard
- Bypass relay for program path protection on power loss
Product Info
Tech Specs
Documents
The 7743DLY-HD is a full function HD/SD-SDI Video Delay module designed for applications such as: satellite uplink, signal re-entry on master control inputs, at cable headends, mobile vehicle outputs, broadcast transmitter inputs, virtual sets and matching delays caused by multi-channel audio compression. The 7743DLY-HD can act as a delay for SD video (SMPTE ST 259) or HD video (SMPTE ST 292-1). The 7743DLY-HD is capable of up to 3.2 seconds of delay for HD and up to 16.5 seconds of delay for SD. With the broadcast environment in mind, the modules feature bypass relay protection on output. The 7743DLY-HD occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Full signal delay capability including VBI and ANC DATA for SMPTE ST 292-1 (1.5Gb/s) signals
- Also supports full signal delay capability including VBI for SMPTE ST 259 (270Mb/s) signals
- Delay programmable in video units (frames, lines and samples) or as time units (seconds)
- Auto senses video standard
- Bypass relay for program path protection on power loss
- Up to 3.2 seconds delay for HD
- Up to 16.5 seconds delay for SD
- Card edge controls operate on screen menu system to program delay settings
- Input circuit features a line buffer which is suitable for "de-glitching" hot switches on upstream equipment (very useful for HD equipment)
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
- Processor Type - Video
- Spec Sheet available - Yes
- Serial Video Input - Standard: SMPTE ST 292-1 (1.5Gb/s) or SMPTE ST 259-C (270Mb/s)
- Serial Video - Number of Inputs: 1
- Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Input - Equalization: Automatic 75m @ 1.5Gb/s with Belden 1694A (or equivalent)
- Serial Video - Number of Outputs: 2 (1 with relay bypass)
- Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Output - Signal Level: 800 mV nominal
- Serial Video Output - DC offset: 0V ±0.5V
- Serial Video Output - Overshoot: < 10% of amplitude
- Serial Video Output - Wideband Jitter: < 0.2UI
- Genlock Input - Type: HD Tri-level Sync; NTSC or PAL Colour Black 1V p-p; Composite Bi-level Sync (525i/59.94 or 625i/50) 300mV
- Genlock Input - Connector: BNC per IEC 61169-8 Annex A
- Genlock Input - Termination: 75 Ohms (jumper selectable)
- Active Power: 20 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive
- Depth: 14 in
- Height: 1.90 in
- Width: 4.50 in
- Product Weight: 1.50 lbs
HD/SD-SDI Video Delay
52 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 7743DLY-HD
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page