4K60 4:4:4 HDMI and RS–232 Transmitter over Ultra–Reach MM/SM Fiber Optic

Model: 676T

Part #: 50-067690

High Performance Standard Fiber Extender — HDMI fiber transmitter for providing ultra–reach signals over either multi–mode or single–mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi–mode SFP+ included).
Multi–drop Signal Distribution — Use optical splitters to extend the input signals from a single transmitter to multiple receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution
HDMI Signal Extension — HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS–HD as specified in HDMI 2.0.
Power Saving — With CEC ON/OFF function, shut down a display device automatically when not in use, and auto power it ON upon presentation start.
I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID handling, processing and pass–through algorithm that ensures Plug and Play operation for HDMI source and display systems.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

676T is a high−performance HDMI fiber transmitter for ultra−reach extension of 4K@60Hz (4:4:4) HDMI signals. 676T converts the HDMI and RS−232 input signal to an optical signal that is transmitted over a fiber optic cable to a compatible receiver that converts it back to HDMI and RS−232 signals. 676T includes a multi−mode SFP+ transceiver, but can be used with any Kramer certified SFP+ transceiver, such as a single−mode SFP+ transceiver.

High Performance Standard Fiber Extender — HDMI fiber transmitter for providing ultra–reach signals over either multi–mode or single–mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi–mode SFP+ included).
Multi–drop Signal Distribution — Use optical splitters to extend the input signals from a single transmitter to multiple receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution
HDMI Signal Extension — HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS–HD as specified in HDMI 2.0.
Power Saving — With CEC ON/OFF function, shut down a display device automatically when not in use, and auto power it ON upon presentation start.
I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID handling, processing and pass–through algorithm that ensures Plug and Play operation for HDMI source and display systems.
Bidirectional RS–232 Extension — Serial interface data flows in both directions, to enable data transmission and control of devices.
Cost–Effective Maintenance — Status LED indicators for power, source, sink and fiber link connections detection facilitate easy local troubleshooting.
Easy Installation — DigiTOOLS® rack mountable fan–less enclosure enables side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.

Receiver/Transmitter Cable Type - HDMI
Receiver/Transmitter Format Type - HDMI
ROHS Compliant - Yes
Supported Resolution - Other
Spec Sheet available - Yes

Depth: 2.81 in
Height: 0.96 in
Width: 4.72 in
Shipping Weight: 1.54 lbs
Regulatory Compliance: WEEE
DC Voltage: 12 Volts
Product Weight: 0.44 lbs
Certifications: CE, UL
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Current Draw: 2 Amps
Shipping Width (with packaging): 6.18 in
Shipping Height (with packaging): 3.43 in
Shipping Depth (with packaging): 4.72 in
Enclosure: Size: Tool
•Type: Aluminum
•Cooling: Convection ventilation
Outputs: Fiber Optic: On LC connector(s)
Storage Temperature: –40° to +70°C (–40° to 158°F)
Video: Max Bandwidth: 18Gbps
•Max Resolution: 4096x2160@60Hz 4K@60 (4:4:4)
•Compliance: HDMI 2.0 and HDCP 2.2
User Interface: Indicators: Source detection, sink detection, optical link and power LEDs Controls: Reset button
Ports: RS-232: On a 3–pin terminal block connector
•USB: On a female micro USB connector for firmware upgrade
Accessories: Included: MM SFP+ transceiver, power adapter, power cord, mounting bracket set
Inputs: HDMI: On a female HDMI connector
Humidity: 10% to 90%, RHL non–condensing
Extended RS-232: Baud Rate: 300 to 115200
EXTENSION LINE: Optical Fiber: Multi–mode (MM) or single–mode (SM)
•Optical Module: Kramer 10Gbps SFP+ IEEE 802.3ae compliant modules (MM is included)
MULTI-MODE LINE: Compliance: G.651.1 OFNR fiber
•Max Reach over OM3 MM Fiber: 3km (1.8 miles)
SINGLE-MODE LINE: Compliance: G.652D OFNR
•fiber Max Reach over OS1 SM Fiber: 33km (20.5 miles)