Computer Graphics Video & Stereo Audio over Twisted Pair Receiver

Series: Main

Model: TP-122N

Part #: 90-709510090

HDTV Compatible.
Max. Resolution - WUXGA & 1080p.
Level (Gain) and EQ (Peaking) Controls.
System Range - Up to 100m (320ft).
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The TP-122N is a twisted pair receiver for computer graphics video, unbalanced stereo and S/PDIF audio signals. The TP-122N receives a twisted pair signal from the TP-122EDID transmitter and converts it back into computer graphics video, unbalanced stereo and S/PDIF audio outputs.

HDTV Compatible.
Max. Resolution - WUXGA & 1080p.
Level (Gain) and EQ (Peaking) Controls.
System Range - Up to 100m (320ft).
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other.
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.

Supported Resolution - 1080p (1920x1080)
Supported Resolution - WUXGA (1920x1200)
Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - Stereo Audio
Receiver/Transmitter Format Type - Other
Spec Sheet available - Yes

Depth: 2.95 in
Height: 0.98 in
Width: 4.70 in
Product Weight: 0.67 lbs
INPUT: 1 RJ-45 line in connector
Output: Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level: Video: 1V; Audio: 2.5V
S/N Ratio: Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <–80dB
Total Gain: Audio: Analog/analog: 0dB., Analog/SPDIF: –12dBFS
Controls: Level: –7.5dB to +4.4dB, EQ.: 0dB to +33dBu (130m) @50MHz
Coupling: AC
THD+N: Audio: <0.01%
Power Consumption: 12V DC 190mA (TP-122N), 12V DC 540mA (TP-121EDID/TP-122N pair when powered from TP-121EDID via Power Connect), 12V DC 390mA (TP?121EDID/TP-122N pair when powered from TP-122N via Power Connect)
Accessories: Power supply
Options: RK-3T 19" rack adapter
Current Draw: 0.54 Amps
DC Voltage: 12 Volts

Twisted Pair Receiver 196 kb - Data Sheet

Project List

Suggested Products

Transmitter OMNEO

by Bosch Conferencing and Public Address Systems

Low-Cost HDMI Over Gigabit IP Network Range Extender (Next-Generation Model) - Receiver Only, US NEMA 1-15P

by Network Technologies Inc (NTI)

Low-Cost HDMI Over Gigabit IP Network Range Extender (Next-Generation Model)

by Network Technologies Inc (NTI)

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page