HDMI, Bidirectional RS-232 & IR over Twisted Pair Receiver

Series: Main

Model: TP-574

Part #: 90-70912090

Max. Data Rate - 1.65Gbps
HDTV Compatible
HDCP Compliant
HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD)
3D Pass-Through

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The TP-574 is a twisted pair receiver for HDMI, bidirectional RS-232 and infrared signals. The TP-573 converts the input signals to a twisted pair signal and the TP-574 converts it back to HDMI, RS-232 and infrared signals.

Max. Data Rate - 1.65Gbps
HDTV Compatible
HDCP Compliant
HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD)
3D Pass-Through
EDID PassThru - Passes EDID signals between the source and display
Bidirectional RS-232 & IR Interface. - 38400 max baud rate
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable.
Cable - Requires shielded twisted pair (STP) cable.
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance
Power Connect System™ - A single connection to the transmitter powers both units
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter

Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - HDMI
Receiver/Transmitter Format Type - IR
Receiver/Transmitter Format Type - Other
Spec Sheet available - Yes

Depth: 2.83 in
Height: 0.95 in
Width: 4.76 in
DC Voltage: 12 Volts
Product Weight: 0.67 lbs
Inputs: 1 CAT 5 IN on an RJ-45 connector
Outputs: 1 HDMI connector, 1 bidirectional IR port on a 3.5mm mini jack, 1 bidirectional RS-232 port on a 9-pin D-sub connector
Bandwidth: Supports up to 1.65Gbps bandwidth per graphic channel
COMPLIANCE WITH HDMI STANDARD: Supports HDMI 1.3 and HDCP
Power Source: 12V DC from TP-573
Options: RK-3T 19 rack mount, Kramer remote external receiver, Kramer BC DGKat524 (CAT 5 24AWG) and BC DGKat623 (CAT 6 23AWG) cables
Rack Units (Height): 1

Twisted Pair Receiver 196 kb - Data Sheet

Project List

Suggested Products

Transmitter OMNEO

by Bosch Conferencing and Public Address Systems

DM Lite 4K60 4:4:4 Transmitter for HDMI and Analog Audio Signal Extension over CATx Cable, Wall Plate, Black

by Crestron Electronics, Inc.

Low-Cost HDMI Over Gigabit IP Network Range Extender (Next-Generation Model), UK BS1363

by Network Technologies Inc (NTI)

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page