HDMI, Bidirectional RS-232, Ethernet & IR over HDBaseT Twisted Pair Transmitter

Series: Main

Model: TP-581T

Part #: 71-709140190

Max. Data Rate - 2.25Gbps
HDBaseT Technology
HDTV Compatible
HDCP Compliance
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The TP-581T is a high-quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS-232 and IR signals. The TP-581T takes the HDMI input, and converts it with the Ethernet 100BaseT, RS-232 and IR input signals to a twisted pair signal. The TP-582R converts the twisted pair signal back to Ethernet 100BaseT, RS-232, IR and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK audio outputs.

Max. Data Rate - 2.25Gbps
HDBaseT Technology
HDTV Compatible
HDCP Compliance
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC
3D Pass-Through
EDID PassThru - Passes EDID signals between the source and display
Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit
Ethernet Interface - Passes 100BaseT
System Range - Up to 100m (330ft)
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The
Control - Front panel
Indicators - Status LEDs for input selection, output, link and power
Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter

HDBaseT - Yes
Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - HDMI
Receiver/Transmitter Format Type - IR
Receiver/Transmitter Format Type - Other
Spec Sheet available - Yes

Depth: 4.50 in
Height: 1 in
Width: 7.40 in
Current Draw: 0.80 Amps
DC Voltage: 5 Volts
Product Weight: 1.40 lbs
Inputs: 1 HDMI connector, 1 IR on a 3.5mm mini jack, 1 Ethernet 100BaseT on an RJ-45 connector, 1 RS-232 on a 9-pin D-sub connector
Outputs: 1 RJ-45 connector
Bandwidth: Supports up to 2.25Gbps bandwidth per graphic channel
COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP
Accessories: Power supply
Options: RK-T2B 19 rack mount
Transmission Range: 330 ft
Rack Units (Height): 1

TP-581T.pdf 44 kb - Data Sheet

Project List

Suggested Products

Transmitter OMNEO

by Bosch Conferencing and Public Address Systems

DM Lite HDMI over CATx Transmitter and 3 x 1 Auto-switcher with 2 HDMI+ VGA and Analog Audio, UK/European Wall Plate, Black Textured

by Crestron Electronics, Inc.

HDMI Over Gigabit IP Extender with Power over Ethernet (POE): Extend up to 333 Feet - Local Unit

by Network Technologies Inc (NTI)

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page