Low-Cost Environment Monitoring System – Supports up to 24 Temperature Sensors

• Meter/Monitor Type - Other
• ROHS Compliant - Yes
• Warranty - Yes
• Spec Sheet available - Yes

• Operating Temperature (Maximum): 167 F
• Operating Temperature (Minimum): -4 F
• Certifications: CE, RoHS
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 110 Volts
• Depth: 3.65 in
• Height: 1.37 in
• Width: 4 in
• Regulatory Compliance: CE, RoHS
• Warranty (Length/Type): Two years.
• RJ11 Sensor Ports: Two RJ11 6P4C jacks for daisy-chaining 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination. Up to 24 temperature, thermocouple, or any single reading 1-wire sensor can be split between both RJ11 connectors. Up to 8 temperature/humidity/dew point combination 1-wire sensors can be split between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors. Up to 12 digital input expanders can be split between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each digital input expander is equivalent to 2 single reading sensors. Maximum cable length supported on each connector is up to 600ft (183 m) depending on the configuration and number of connected sensors. This maximum includes the cable length of each sensor. RJ11 splitters or t-tap boards (RJ11-3JCK) for daisy-chaining sensors are sold separately. Sensors can be extended up to 7 feet from an RJ11-3JCK.
• Dry Contact Closures: Two screw terminal pairs for connecting dry contact devices and liquid detection sensors.
• USB Port: One female Micro USB connector for connecting a USB modem.
• Ethernet Port: One female RJ45 connector. 10/100 Base-T Ethernet interface.
• Protocols: HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, TLS v1.2, AES & DES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour Compatible with any SNMP management software. The unit can be polled via SNMP. Operates and configures via HTTP/HTTPS web page. An IP address can be assigned to the E-1W automatically by a DHCP server. Generates SNMP traps, email alerts, syslog messages, and SMS messages (via email-to-SMS). Alerts are posted in event log, which is accessible through Web user interface. Email alerts can be sent to 9 addresses. Users can configure the schedule for when they will be alerted. Supports HTTP REST API to poll sensor data with response in JSON format.
• Power: Dual DC power provides dual redundancy. If the first power source fails, the unit will automatically, without interruption, switch over to the second power source. The unit draws power from the source with the highest DC voltage (nominal 5.5V). If both sources have exactly the same voltage, it will draw in part from each of them. 110 to 240 VAC at 50 or 60 Hz via AC adapter. Includes one country-specific AC adapter. The second AC adapter is sold separately (PWR-SPLY-ELC). Input voltage: 5.5VDC ±5%. Power consumption: 5W max.
• Environmental: Operating & Storage Temperature: -4 to 167°F (-20 to 75°C). Operating & Storage Relative Humidity: 0 to 90% non-condensing RH.
• MTBF: 703,871 hours
• Web Interface: Configuration can be done over the Internet/LAN via Web page. When connected as an IP remote sensor for an E-2D/5D/16D unit, the E-1W is configured via the E-xD web interface. Supports Internet Explorer 6.0 and higher, Firefox 1.5 and higher, Netscape 9, Google Chrome, Safari 1.3 and higher for MAC, and Safari 3.0 and higher for PC. Configure sensor thresholds, alarm methods, formats of alerts, and system data log. View/edit sensors' current values, thresholds and alert statuses. All sensors connected to the E-1W can be viewed on one summary page. User configurable settings allow sensors to return to normal status when alert condition clears, without manually acknowledging/dismissing the alert. The sensors will automatically be detected on power up or a Detect Devices button on the summary page can be selected when logged into the unit. View/edit entries stored in the system logs. Event log records system alerts. Stores up to 200 entries. Data log records samples of sensor readings per minute. Stores up to 43,000 entries per sensor. The data log can be downloaded as a comma-separated plain text file. Configure IP information (address, subnet mask, default gateway, DNS, etc.), user administrative settings, and data logging settings. Up to 9 users can access the web page at one time. Permissions, schedule and alert methods are configurable for each user. Configure up to 32 sensor conditions (alerts). Configure 1 Smart Alert to use different alert combinations to send alert messages.
• Telnet: Monitor over the text-based menu system accessible via Telnet. Access is controlled via username/password. System stores encrypted login information. Two user levels: user and administrator.
• Network Operation: SNMP support, allowing integration into network management platforms. Updating the system firmware.
• Open Source Monitoring Integration: Using Multi Router Traffic Grapher. Data Logging using Syslog.
• Optional Management Software: Optional intuitive graphical management software provides an easy-to-use, unified interface for both monitoring and configuring up to 3,000 ENVIROMUX units and all connected sensors. Push configuration changes to multiple connected units in a group at once. E.g. new users, mail server, network settings, security settings, system settings, etc. E-MNG Enterprise Management Software – use to monitor and configure up to 3,000 ENVIROMUX-2D/5D/16D, ENVIROMUX-MICRO-T(RHP), ENVIROMUX-1W(P), ENVIROMUX-SEMS-16(U), IPDU-S4/8 units and all connected sensors.

E-CLP100-LD
Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 10 pack

PWR-SPLY-ELC
Power Supply for E-MICRO-TRH(P) and E-1W