Low-Cost Environment Monitoring System with Power over Ethernet – Supports up to 24 Temperature Sensors

Series: ENVIROMUX®

Model: E-1WP

Monitor and manage server room environmental and security conditions over IP.
Sensors supported: 2 digital inputs sensitive to contact closure. 2 RJ11 6P4C connectors for daisy-chaining 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination.
Up to 24 temperature, thermocouple, or any single reading 1-wire sensor can be connected between both RJ11 connectors.
Up to 8 temperature/humidity/dew point combination 1-wire sensors can be connected between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors.
Up to 12 E-DI2-1W digital input expanders can be connected between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each ENVIROMUX-DI2-1W is equivalent to 2 single reading sensors.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

Videos

The ENVIROMUX® Environment Monitoring System with 1-Wire Sensor Interface monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via external USB 3G modem).

The system functions independently or as an IP-connected remote sensor for the E-2D/5D/16D. The unit supports 24 single reading 1-wire sensors in any combination-temperature, humidity, dew point, thermocouple or digital inputs-and 2 separate digital inputs.

For more information, visit http://www.networktechinc.com/environment-monitor-1wire.html#tab-8

Monitor and manage server room environmental and security conditions over IP.
Sensors supported: 2 digital inputs sensitive to contact closure. 2 RJ11 6P4C connectors for daisy-chaining 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination.
Up to 24 temperature, thermocouple, or any single reading 1-wire sensor can be connected between both RJ11 connectors.
Up to 8 temperature/humidity/dew point combination 1-wire sensors can be connected between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors.
Up to 12 E-DI2-1W digital input expanders can be connected between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each ENVIROMUX-DI2-1W is equivalent to 2 single reading sensors.
Maximum cable length supported on each connector is up to 600ft (183 m) depending on the configuration and number of connected sensors.
Use RJ11 splitters (RJ11-3JCK) to daisy-chain 1-wire sensors (sold separately).
Sensors are hot pluggable.
The sensors will automatically be detected on power up or a Detect Devices button on the summary page can be selected when logged into the unit.
Monitors (ping) up to 4 IP network devices - alerts are sent if devices are not responding.
Sensor conditions can be configured to trigger alerts by themselves, and/or be used in combination with other alerts to trigger one Smart Alert.
Supports 4 IP network video cameras for live view of any facility.
Create multiple alerts for any installed sensor.
Sensor conditions can be configured to trigger alerts by themselves, and/or be used in combination with other alerts to trigger one Smart Alert.
Configure up to 32 alerts, and one Smart Alert.
USB port for connecting USB modem.
Dual redundant power supplies for connection to two separate power sources. The second power supply is sold separately.
Available with optional Power over Ethernet (POE).
Integrates with various Open Source SNMP monitoring packages - Nagios and MRTG The unit can be polled via SNMP.
Coming Soon) Optional intuitive graphical management software provides an easy-to-use, unified interface for both monitoring and configuring up to 3,000 ENVIROMUX units and all connected sensors.
Security: HTTPS, SSLv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.
Use the E-1W(P) with a wireless router and Wi-Fi Range Extender to create a Wireless Environment Monitoring System. Configure, monitor, and receive alerts without the use of a wired network connection.

Meter/Monitor Type - Other
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 167 F
Operating Temperature (Minimum): -4 F
Certifications: CE, RoHS
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 110 Volts
Depth: 3.65 in
Height: 1.37 in
Width: 4 in
Regulatory Compliance: CE, RoHS
Warranty (Length/Type): Two years.
RJ11 Sensor Ports: Two RJ11 6P4C jacks for daisy-chaining 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination. Up to 24 temperature, thermocouple, or any single reading 1-wire sensor can be split between both RJ11 connectors. Up to 8 temperature/humidity/dew point combination 1-wire sensors can be split between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors Up to 12 digital input expanders can be split between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each digital input expander is equivalent to 2 single reading sensors Maximum cable length supported on each connector is up to 600ft (183 m) depending on the configuration and number of connected sensors. This maximum includes the cable length of each sensor. RJ11 splitters or t-tap boards (RJ11-3JCK) for daisy-chaining sensors are sold separately. Sensors can be extended up to 7 feet from an RJ11-3JCK.
Dry Contact Closures: Two screw terminal pairs for connecting dry contact devices and liquid detection sensors.
USB Port: One female Micro USB connector for connecting a USB modem.
Ethernet Port: One female RJ45 connector. 10/100 Base-T Ethernet interface.
Protocols: HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, TLS v1.2, AES & DES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour Compatible with any SNMP management software. The unit can be polled via SNMP. Operates and configures via HTTP/HTTPS web page. An IP address can be assigned to the E-1W automatically by a DHCP server. Generates SNMP traps, email alerts, syslog messages, and SMS messages (via email-to-SMS). Alerts are posted in event log, which is accessible through Web user interface. Email alerts can be sent to 9 addresses. Users can configure the schedule for when they will be alerted. Supports HTTP REST API to poll sensor data with response in JSON format.
Power: Built-in Power over Ethernet and dual DC power provides triple redundancy. Power over Ethernet standards supported: IEEE 802.3af, 802.3at. Proprietary schemes such as Cisco Discovery Protocol are not supported. Similar legacy switches and routers will have to use PWR-SPLY-ELC. If the first power source fails, the unit will automatically, without interruption, switch over to the second power source. The unit draws power from the source with the highest DC voltage (nominal 5.5V). If two or more sources have exactly the same voltage, it will draw in part from each of them.110 to 240 VAC at 50 or 60 Hz via AC adapter (not included). Country-specific AC adapters sold separately (PWR-SPLY-ELC).Input voltage: 5.5VDC ±5%. Power consumption: 5W max. Use the PWR-48V-5-5V4A DC-DC power converter to install the E-1W in a 48V or 24V Telecom environment.