top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Signal Processing Systems : Extenders & Repeaters : Network Technologies Inc (NTI) - ST-IPFO4K18GB-LC
Request Quote
All Products
4K 18Gbps HDMI Extender Over IP via One LC Singlemode/Multimode Fiber Optic Cable
Model: ST-IPFO4K18GB-LC
- Signal transmission via single-strand LC fiber optic cable.
- Using singlemode 9-micron cable, extend to 24.8 miles (40 km).
- Using 50-micron OM2 (or better) multimode cable, extend to 1,640 feet (500 meters).
- Zero latency.
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
Product Info
Tech Specs
Documents
The XTENDEX® 4K 18Gbps HDMI Extender Over IP via Fiber Optic Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, audio, IR, and RS232 up to 24.8 miles (40 kilometers) away from an HDMI source using a single LC singlemode fiber optic strand or 1,640 feet (500 meters) using LC multimode fiber optic cable.
Each 4K 18Gbps HDMI Extender Over IP consists of a local unit that connects to an HDMI source and a local display via the HDMI loop output, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via Fiber Optic Cable or a Point-to-Many connection via a 10G SFP network switch. Support for multiple transmitters requires a managed 10G SFP network switch.
- Signal transmission via single-strand LC fiber optic cable.
- Using singlemode 9-micron cable, extend to 24.8 miles (40 km).
- Using 50-micron OM2 (or better) multimode cable, extend to 1,640 feet (500 meters).
- Zero latency.
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
- Cascade network switches to extend the length longer distances.
- Up to 12 switches can be cascaded.
- HDMI features supported:
- HDMI 2.0
- 8-bit, 10-bit, and 12-bit Deep Color
- Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, LPCM 7.1CH, DTS 5.1, and DTS:X
- RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0/li>
- Bandwidth up to 600 Mhz (18Gbps)
- 3D (1080p @60Hz)
- Support for CEC (consumer electronic control) compatible devices.
- HDR10
- ARC
- HDCP 2.2 and 1.4 compliant.
- Supports local and remote HDMI displays.
- For a point-to-many connection, a standalone network with an unmanaged 10G SFP network switch, hub, or router can be used instead of a managed SFP network switch.
- Easily expandable. Add remote units as you add monitors.
- Up to 255 receivers supported.
- It is not recommended to use any other network devices on this standalone network as it may cause degradation in performance.
- Support for multiple transmitters (many-to-many connection) requires a managed 10G SFP network switch with IGMP support and Jumbo frame support. Standard LAN switches can only support one transmitter.
- The managed 10G SFP network switch must support port-based IEEE 802.1Q VLAN.
- Each VLAN acts as a separate HDMI Over IP Channel on the network.
- Each VLAN channel supports one transmitter.
- The number of local and remote units that can be used is dependent on the backplane bandwidth of the switch.
- Plug and play installation allows receivers to find the transmitters automatically on the same subnet.
- Local and remote units must be in the same LAN. The units do not support WAN connections.
- Built-in default EDID table.
- Supports full-duplex RS232 up to 115200 baud.
- Bi-directional IR control from input and output locations.
- Supports HDMI embedded digital audio and ARC audio extraction via Toslink connection.
- Built-in surge and ESD protection.
- Mounting brackets included for easy surface/wall mounting.
- Package Includes:
- One transmitter unit
- One receiver unit
- One T1270/R1330nm 10G Base-T SFP module
- One T1330/R1270nm 10G Base-T SFP module
- One IR emitter
- One IR receiver
- Two power supplies
- Mounting brackets
- AV-over-IP - Yes
- Extender Type - HDMI
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 140 F
- Operating Temperature (Minimum): -4 F
- Transmission Range: 1,640 ft
- Maximum Frequency Response (Bandwidth): 60 kHz
- Maximum Frequency Response (Bandwidth): 60000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Certifications: CE, FCC
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 4.60 Watt
- Current Draw: 2 Amps
- DC Voltage: 5 Volts
- Depth: 4.54 in
- Height: 1.18 in
- Width: 4.88 in
- Color: Black
- Warranty (Length/Type): 2 Years
- Storage Temperature: -22 to 158°F (-30 to 70°C)
- Operating Relative Humidity: 0 to 90% non-condensing RH
Extender
172506 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Network Technologies Inc (NTI)
Model: ST-IPFO4K18GB-LC
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page