top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Signal Processing Systems : Extenders & Repeaters : Network Technologies Inc (NTI) - VOPEX-C64K18GB-4HDBT
Request Quote
All Products
4K 18Gbps HDMI HDBaseT Splitter/Extender via CAT6/6a/7: 4-Port
Model: VOPEX-C64K18GB-4HDBT
- Transmits an uncompressed HDMI signal over one CAT6/6a/7 cable to multiple display locations.
- Extend Ultra-HD 4Kx2K 60Hz 4:4:4 to 394 feet (120 meters).
- Extend 1080p and 1920x1200 to 443 feet (135 meters).
- Zero latency.
- Supports Ultra-HD 4Kx2K resolutions (4096x2160 and 3840x2160 @30/60Hz YUV 4:4:4), HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
Product Info
Tech Specs
Documents
The VOPEX® 4K 18 Gbps HDMI HDBaseT Splitter/Extender simultaneously distributes uncompressed Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI video, multi-channel audio, RS232, and IR from one video source to up to four displays and speakers, each located up to 394 feet away via CAT6/6a/7 cable using HDBaseT technology.
The VOPEX-C64K18GB-4HDBT system consists of a 4K HDMI HDBaseT broadcast unit, which connects to the HDMI source and also supplies video to a local display via the HDMI loop output; and four included receivers for each remote 4K HDMI display and speakers. The units are interconnected by CAT6/6a/7 cable.
- Transmits an uncompressed HDMI signal over one CAT6/6a/7 cable to multiple display locations.
- Extend Ultra-HD 4Kx2K 60Hz 4:4:4 to 394 feet (120 meters).
- Extend 1080p and 1920x1200 to 443 feet (135 meters).
- Zero latency.
- Supports Ultra-HD 4Kx2K resolutions (4096x2160 and 3840x2160 @30/60Hz YUV 4:4:4), HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
- HDMI features supported:
- HDMI 2.0 compliant.
- Up to 36-bit Deep Color
- LPCM, Dolby Digital, Dolby TrueHD, DTS-HD, and DTS2
- RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0
- Bandwidth up to 18 Gbps
- 3D
- HDR10
- HDCP 2.2/1.4 compliant.
- Supports the DDC2B protocol.
- Includes four receivers.
- The receivers do not require a power supply.
- Full Infrared Remote (IR) control of HDMI source or display. IR transport channel can be forward or backward per the installation.
- RS232 for configuration and control, pass-through, and firmware updates.
- Supports RS232 pass-through from transmitter to receiver or from receiver to transmitter.
- Baud rate: 115200 bps
- Built-in EDID table.
- Cascade units together to send video simultaneously to many receivers.
- Mounting brackets included for easy surface/wall mounting.
- Ideal for digital signage, tradeshows, or classrooms where high quality video on multiple displays is needed.
- Includes:
- One 4-port HDBaseT splitter
- Four HDBaseT receivers
- Five IR emitters
- Five IR receivers
- Five 3-pin Phoenix connectors for RS232
- One 5-pin Phoenix connector for audio
- One power supply
- Extender Type - HDMI
- HDBaseT - Yes
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Transmission Range: 394 ft
- Certifications: CE, FCC
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 2.70 Amps
- DC Voltage: 24 Volts
- Depth: 5.40 in
- Height: 1.62 in
- Width: 8.69 in
- Warranty (Length/Type): 2 Years
- Active Power: 30 Watt
Splitter/Extender
141835 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Network Technologies Inc (NTI)
Model: VOPEX-C64K18GB-4HDBT
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page