3LCD Solid Shine Laser Projector

Model: PT-MZ10KU

Part #: PT-MZ10KL

Laser LCD, 10,000 lumens, WUXGA
Compact and lightweight body, designed with ultra-low noise operation
Long lasting laser light source and low-maintenance design provide high brightness and superb image quality

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The PT-MZ10KU is a 3LCD SOLID SHINE Laser Projector designed for fixed installations.

Laser LCD, 10,000 lumens, WUXGA
Compact and lightweight body, designed with ultra-low noise operation
Long lasting laser light source and low-maintenance design provide high brightness and superb image quality

Aspect Ratio - 16:10
HDBaseT - Yes
Number of Imagers - 3-chip
Projector Applications - Corporate
Projector Applications - Education
Projector Technology Type - LCD
Supported Resolution - WUXGA (1920x1200)
Spec Sheet available - Yes
Spec Sheet available - Yes

Brightness Full: 10000 lumens
Depth: 17.31 in
Height: 7.28 in
Width: 25.59 in
Product Weight: 49.20 lbs
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Projector Type: LCD projectors
DLP™ chip - Panel size (inch): 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
DLP™ chip - Display method: Transparent LCD panel (x 3, R/G/B)
DLP™ chip - Number of Pixels: 2,304,000 (1920 x 1200) pixels x 3 , total of 6,912,000 pixels
Light Source: Laser diodes
Light Output: 10,000 lm
Time until light output declines to 50 %: 20,000 hours (NORMAL) / 24,000 hours (ECO)
Screen size [diagonal] (inch): 1.78–25.4 m (70–1,000 in), 16:10 aspect ratio
Lens: Optional powered zoom lenses
Lens shift - Vertical (from center of screen): TBD
Lens shift - Horizontal (from center of screen): TBD
Keystone Correction Range: Vertical: +/-40°, Horizontal: +/-15°
Keystone correction range with optional ET-UK20 Upgrade Kit: Vertical: +/-40°, Horizontal: +/-40°
Installation: Ceiling/floor, front/rear, free 360-degree installation
Terminals - SDI IN: BNC x 1: 3G/HD/SD-SDI input
Terminals - HDMI IN: HDMI 19-pin x 1 (Compatible with HDCP, Deep Color)
Terminals - DVI-D IN: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
Terminals - MULTI PROJECTOR SYNC IN: BNC x 1
Terminals - MULTI PROJECTOR SYNC OUT: BNC x 1
Terminals - SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals - SERIAL OUT: D-sub 9-pin (male) x 1 for link control
Terminals - REMOTE 1 OUT: M3 stereo mini-jack x 1
Terminals - REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)
Terminals - LAN: RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
Terminals - DIGITAL LINK/LAN: RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP, Deep Color)
Power Supply: AC 100-240 V, 50/60 Hz
Power Consumption: TBD
Cabinet materials: Molded plastic
Operation noise: 35 dB/TBD/TBD (NORMAL/ECO/QUIET) (TBD)
Dimensions (W x H x D) (inch): 650 x 185*3 x 440 mm (25 19/32? x 7 9/32?*3 x 17 5/16? ) (Without lens) (Not including protruding parts)
Operating Environment: Operating temperature: 0–45 °C (32–113 °F)*5; Operating humidity: 10–80 % (no condensation)
Applicable Software: Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Note: 1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [2], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 With legs at shortest position.*4 Average value. May differ depending on the actual unit. *5 Light output is limited at operating temperatures higher than 30 °C (86 °F), and projectors cannot be operated at altitudes higher than 2,700 m (8,858 ft) above sea level.
Terminals - REMOTE 1 IN: M3 x 1 for wired remote control
Terminals - USB: USB Connector (Type A) x 1 (Output 5 V/2 A)
Center-to-corner zone ratio: 0.9
Filter: Included (Estimated maintenance time: approx. 20,000 hours)
Terminal - RGB In: D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)

266703_PT-MZ10KL_SPEC_FILE_ENGLISH.pdf 1748265 kb - Data Sheet

Project List

265686_mz16k_cat_en.pdf 1109391 kb - Data Sheet

Project List

Suggested Products

DWU760-iS 1DLP Laser Projector

by Christie

DWU860-iS 1DLP Laser Projector

by Christie

Pro L1750UNL WUXGA 3LCD Laser Projector without Lens, 4K Enhancement

by EPSON

Emerald Terms | | Powered by AV-iQ

bottom of page