top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Two Channel, 200watt Professional Amplifier
Series: SPA
Model: SPA2-200
- Up to 200watts per channel into 4 and 8ohms — the outputs of the SPA2-200 model are designed to provide up to 200watts per channel into Low-Z loads
- ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost
- Bridgeable outputs for higher power — Bridging the outputs of the SPA2-200 will deliver up to 350watts into 70V or 100V when bridged
- Auto-Ramp provides quiet startup and power-down — The ENERGY STAR auto-ramp circuitry ensures quiet and fast power up from standby and seamless power-down following 25minutes of inactivity, dramatically reducing power consumption
- Rack-mountable 1U, half rack width enclosure — The SPA amplifers can be mounted in 1RU, 1/2 rack space, and their clever joining brackets enable easy under-table and wall-mounting
Product Info
Tech Specs
Related Products
Documents
For higher power the SPA2-200 two channel amplifier delivers up to 200watts rms per channel into 4 or 8ohms; the two channels can also be bridged providing up to 400 watts rms into 4 or 8ohms. When the channels are bridged they can be switched into 70V or 100V direct drive mode providing up to 350 watts rms into a mono 70V or 100V output. Like the other SPA models, an 80Hz highpass filter is engaged when in 70V or 100V mode.
- Up to 200watts per channel into 4 and 8ohms — the outputs of the SPA2-200 model are designed to provide up to 200watts per channel into Low-Z loads
- ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost
- Bridgeable outputs for higher power — Bridging the outputs of the SPA2-200 will deliver up to 350watts into 70V or 100V when bridged
- Auto-Ramp provides quiet startup and power-down — The ENERGY STAR auto-ramp circuitry ensures quiet and fast power up from standby and seamless power-down following 25minutes of inactivity, dramatically reducing power consumption
- Rack-mountable 1U, half rack width enclosure — The SPA amplifers can be mounted in 1RU, 1/2 rack space, and their clever joining brackets enable easy under-table and wall-mounting
- Amplifier Type - Power Amplifier
- Energy Star rated - Yes
- Rackmountable - Yes
- ROHS Compliant - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Certifications: UL, CE, WEEE, FCC
- Impedance: 10000 ohm
- Rack Units (Height): 1
- Signal to Noise Ratio: 100 dB
- Depth: 9.50 in
- Height: 1.70 in
- Width: 8.70 in
- Product Weight: 4 lbs
- Shipping Weight: 6.50 lbs
- Number of Channels: 2
amplifier
658473 kb
- Data Sheet
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Q-SYS
Model: SPA2-200
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page