MGW Nano HD Encoder

Model: MGW Nano HD

Part #: 13678

Low latency HD streaming from SDI or HDMI sources with metadata
Hardware based resolution and frame rate scaling
Real-time image stabilization and image cropping (Area of Interest isolation)
Motion-adaptive adjustment of bit-rate utilization in static scenes
Built-in Zixi and ProMPEG FEC Error correction technologies

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Portable MPEG-4 H.264 encoding and streaming appliance featuring Full HD processing, HD/SD-SDI and HDMI inputs, KLV/STANAG metadata support and Error-free content delivery using Zixi™ technology and ProMPEG FEC.

Low latency HD streaming from SDI or HDMI sources with metadata
Hardware based resolution and frame rate scaling
Real-time image stabilization and image cropping (Area of Interest isolation)
Motion-adaptive adjustment of bit-rate utilization in static scenes
Built-in Zixi and ProMPEG FEC Error correction technologies

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Streaming Decoder/Encoder
Spec Sheet available - Yes

Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): -40 F
Certifications: FCC, CE, TAA
Depth: 4.66 in
Height: 1.41 in
Width: 5.46 in
Product Weight: 1.44 lbs
Video Inputs:
•1 x HD-SDI/SD-SDI (SMPTE 259M-C, SMPTE 292M, SMPTE 274M, SMPTE 296M, SMPTE 424M, SMPTE 425M)
•1 x HDMI (support for HDCP and non-HDCP protected sources)
Input Resolutions / frame rates:
•1920x1080p at 60, 59.94, 50, 30, 29.97, 25, 24 Hz
•1920x1080i at 60, 59.94, 50 Hz
•1600x1200p at 85, 60, 50 Hz
•1366x768p at 60, 50 Hz
•1280x800p at 60, 50 Hz
•1280x768p at 60, 50 Hz
•1024x768p at 60, 50 Hz
•1280x720p at 60, 59.94, 50, 30, 29.97, 25 Hz
•720x480p at 30, 29.97 Hz
•720x480i at 59.94 Hz
•720x576p at 25 Hz
•720x576i at 50 Hz
Audio Inputs:
•1 x SDI Embedded audio (Stereo and Mono)
•1 x HDMI Embedded audio (Stereo and Mono)
Video Output:
•H.264 (ISO\IEC 14496-10 AVC MPEG-4 part 10). Modes:
•Baseline Profile L3
•Main Profile L3 and L4
•High Profile L4 and L4.1
•Bit Rate: 100 Kbps - 14 Mbps
•Frame Rate: 5-60 fps. Down sampling modes: third, half, three quarters
•Bit Rate Regulation Modes: Constant (CBR), Variable (VBR)
•Output Resolutions: Configurable from QCIF up to 1920x1080p30 / 1280x720p60
•Encoding Latency: 65 milliseconds (TurboVideo™ mode)
Audio Output:
•MPEG-4 AAC-LC (ISO/IEC 14496-3), MPEG-1 L2
•Stereo and mono modes
•Bit Rate: 32Kbps - 256Kbps in Stereo, 16Kbps - 128Kbps in Mono
•Sampling Rate: 16 kHz - 48 kHz
Network protocols:
•Streaming: UDP, RTP, RTSP, SAP, MPEG-2 Transport encapsulation, unicast and multicast modesError Correction: Zixi™ technology for up to 30% packet loss recovery, SMPTE-2022 ProMPEG Forward-Error-Correction (FEC)Peripheral: HTTPS, DHCP, NTP, SSH, SAP
Management:
•Secure Web based remote management interface (HTTPS)
•Dashboard with dynamically updating I/O signal detection and streaming stats
•SSH interface with “get/set” or XML API for integration with 3rd party control software
•Autostart mode recovers saved configuration after power cycle
•Remote firmware and software upgrade capability via command line
•System and channel event logging
Security:
•Real-time AES encryption for video, audio and metadata. Interoperability with EZ TV and FITIS systems.
•Password protected HTTP and CLI control interfaces
Metadata:
•CoT over serial RS-232, KLV over IP, KLV over SDI (VANC per SMPTE 336M)
•UAS Datalink Local Metadata Set (MISB STD 0601.5, STD 0902)
•Time Stamping and Transport of Compressed Motion Imagery and Metadata (MISB STD 0604.2)
•Cursor on Target (CoT) Conversions to Key- Length-Value (KLV) Metadata (MISB EG 0805)
•Security Metadata Universal and Local Sets for Digital Motion Imagery (MISB STD 0102.8)
•STANAG 4609 output stream over UDP/IP

Encoder 197478 kb - Data Sheet

Project List

Emerald Terms | | Powered by AV-iQ

bottom of page