2RU Rack-mount Digital Display

Model: 1200DD

Competely self-setting with SMPTE ST 12-1 LTC timecode input or battery back-up
Built-in quartz time base oscillator with battery back-up
May be operated as a timecode reader for use with countdowns
Digital display is user-selectable between HH:MM:SS, 12/24 hour, HH:MM:SS FF and date
IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated code (format B122)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The 1200DD & 1201DD are LED digital clocks with 7-segment-digits display. They may operate as a timecode-reading clock or as a SMPTE ST 12-1 linear timecode reader, simply displaying the input timecode. In addition to SMPTE ST 12-1 timecode, the clocks can operate on the internal quartz time base from IRIG-B, a GPS antenna or NTP.This multi-way reference capability allows easy integration into new or existing clock systems.

Competely self-setting with SMPTE ST 12-1 LTC timecode input or battery back-up
Built-in quartz time base oscillator with battery back-up
May be operated as a timecode reader for use with countdowns
Digital display is user-selectable between HH:MM:SS, 12/24 hour, HH:MM:SS FF and date
IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated code (format B122)
Optional GPS receiver
May be configured as a timecode generator to drive other clocks
LED brightness is adjustable
Runs on 50/60Hz, 115/230V AC power line
User-programmable time offsets
Rack mountable
VistaLINK® control for device configuration and status monitoring
Programmable daylight savings time start & end times
NTP client
Standard red LEDs (Green Optional -G)
Compatible with Evertz UDT protocol

Rackmountable - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): -22 F
AC Voltage: 240 Volts
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 15 Watt
DC Voltage: 12 Volts
Depth: 2.76 in
Height: 3.54 in
Width: 19.02 in
Product Weight: 3 lbs
Color: Red
Standard: SMPTE ST 12-1 linear time code - 24, 25 or 30 Fps
Impedance: > 30 ohm, balanced
Connector: 3 pin female XLR
Level: 1V to 4.5V p-p
Baud Rate: 57.6kbaud
Format: 8 data bits, no parity, 2 stop bits
Accuracy: < 2 seconds per day with power on, no timecode preset < 10 seconds / day with power removed
Time Zone Offset: 0 to 23.5 hours in 0.5 hour increments Set with menu
Network Type: Ethernet 100 Base-TX IEEE 802.3u standard for 100Mb/s baseband, CSMA/CD local area network
NTP Standard: FRC-1305 compliant, client mode support
Type: CR-2032 3 volt lithium cell
Life expectancy: > 5 years
Rackmountable: Yes

1200DD-G - 2RU Rack-mount Digital Display - Green LEDs

1201DD - 1RU Rack-mount Digital Display

1201DD-G - 1RU Rack-mount Digital Display - Green LEDs

Rack-mount Digital Display 49 kb - Data Sheet

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

bottom of page