top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1RU Rack-mount Digital Display - Green LEDs
Model: 1201DD-G
- Competely self-setting with SMPTE ST 12-1 LTC timecode input or battery back-up
- Built-in quartz time base oscillator with battery back-up
- May be operated as a timecode reader for use with countdowns
- Digital display is user-selectable between HH:MM:SS, 12/24 hour, HH:MM:SS FF and date
- IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated code (format B122)
Product Info
Tech Specs
Related Products
Documents
The 1200DD & 1201DD are LED digital clocks with 7-segment-digits display.They may operate as a timecode-reading clock or as a SMPTE ST 12-1 linear timecode reader, simply displaying the input timecode.In addition to SMPTE ST 12-1 timecode, the clocks can operate on the internal quartz time base from IRIG-B, a GPS antenna or NTP.This multi-way reference capability allows easy integration into new or existing clock systems.The model 1200DD clock face has 2.25" tall digits that may display HH:MM:SS AM/PM or HH:MM:SS FF, depending on the control settings.The model 1201DD clock face has 1.00" tall digits that may display HH:MM:SS AM/PM or HH:MM:SS FF depending on the control settings.The brightness of the digital LEDs is adjustable.
- Competely self-setting with SMPTE ST 12-1 LTC timecode input or battery back-up
- Built-in quartz time base oscillator with battery back-up
- May be operated as a timecode reader for use with countdowns
- Digital display is user-selectable between HH:MM:SS, 12/24 hour, HH:MM:SS FF and date
- IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated code (format B122)
- Optional GPS receiver
- May be configured as a timecode generator to drive other clocks
- LED brightness is adjustable
- Runs on 50/60Hz, 115/230V AC power line
- User-programmable time offsets
- Rack mountable
- VistaLINK® control for device configuration and status monitoring
- Programmable daylight savings time start & end times
- NTP client
- Standard red LEDs (Green Optional -G)
- Compatible with Evertz UDT protocol
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): -22 F
- AC Voltage: 240 Volts
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 15 Watt
- DC Voltage: 12 Volts
- Depth: 2.76 in
- Height: 1.77 in
- Width: 19.02 in
- Product Weight: 2 lbs
- Color: Green
- Standard: SMPTE ST 12-1 linear time code - 24, 25 or 30 Fps
- Impedance: > 30 ohm, balanced
- Connector: 3 pin female XLR
- Level: 1V to 4.5V p-p
- Baud Rate: 57.6kbaud
- Format: 8 data bits, no parity, 2 stop bits
- Accuracy: < 2 seconds per day with power on, no timecode preset < 10 seconds / day with power removed
- Time Zone Offset: 0 to 23.5 hours in 0.5 hour increments Set with menu
- Network Type: Ethernet 100 Base-TX IEEE 802.3u standard for 100Mb/s baseband, CSMA/CD local area network
- Ethernet 10 Base-T IEEE 802.3 standard for 10Mb/s baseband, CSMA/CD local area network:
- NTP Standard: FRC-1305 compliant, client mode support
- Type: CR-2032 3 volt lithium cell
- Life expectancy: > 5 years
- Rackmountable: Yes
Rack-mount Digital Display
49 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Evertz
Model: 1201DD-G
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page