top of page
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,200,000 data log entries; 3,000 event log entries.
Series: ENVIROMUX®
Model: E-16DEL
- Monitor and manage server room environmental and security conditions over IP.
- Sensors supported: 16 external configurable sensors 8 digital inputs sensitive to contact closure 3 internal sensors – temperature, humidity, power 8 Remote Temperature/Humidity Sensors over IP E-MICRO-T: 1 integrated temperature sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, dual DC power (dual redundancy). E-MICRO-TRHP: 1 integrated temperature/humidity combination sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, built-in Power over Ethernet (POE), dual DC power (triple redundancy).
- Four output relays for control of external devices. Relay activates upon alarm or via the user interface. Control output relays via SNMP SET commands to power on/off external devices.
- Supports IP network video cameras for live view of any facility. One integrated view – see different Web cameras side-by-side with physical and environmental parameters. Any programmed event can trigger a snapshot from an IP camera.
- Monitor (ping) up to 64 IP network devices. Alerts are sent if devices are not responding
Product Info
Tech Specs
Related Products
Documents
Accessories
Videos
The ENVIROMUX® Enterprise Environment Monitoring System monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, LEDs, alarm beacon, siren, web page, network management (SNMP), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via external USB 3G modem).
The system includes three internal sensors: temperature, humidity and power. It also supports 16 external configurable sensors, eight digital input sensors, and four output relays for control of external devices. For more information, visit http://www.networktechinc.com/environment-monitor-16d.html
- Monitor and manage server room environmental and security conditions over IP.
- Sensors supported: 16 external configurable sensors 8 digital inputs sensitive to contact closure 3 internal sensors – temperature, humidity, power 8 Remote Temperature/Humidity Sensors over IP E-MICRO-T: 1 integrated temperature sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, dual DC power (dual redundancy). E-MICRO-TRHP: 1 integrated temperature/humidity combination sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, built-in Power over Ethernet (POE), dual DC power (triple redundancy).
- Four output relays for control of external devices. Relay activates upon alarm or via the user interface. Control output relays via SNMP SET commands to power on/off external devices.
- Supports IP network video cameras for live view of any facility. One integrated view – see different Web cameras side-by-side with physical and environmental parameters. Any programmed event can trigger a snapshot from an IP camera.
- Monitor (ping) up to 64 IP network devices. Alerts are sent if devices are not responding
- Linux inside.
- Create multiple alerts for any installed sensor.
- Sensor conditions (events) can be configured to trigger alerts by themselves, and/or be used in combination with other events to trigger Smart Alerts. Configure up to 50 events. Setup SSH commands to be sent when events are triggered to soft shutdown or reboot machines. Up to 20 Smart Alerts can be configured to use different event combinations to send alert messages.
- View entries stored in the system logs. Event log records system events such as alerts, user login/logout, failed email messages, etc. Data log records samples of sensor readings. User specified sampling time period. With E-16D, both the event log and the data log store up to 1,000 entries. With E-16DEL, up to 1,200,000 data log entries and 3,000 event log entries are stored. 256 MB non-volatile memory - both the data log and event log persist after power cycle.
- Automatically configures network settings received from a connected DHCP server. If a DHCP server is not found, the default static IP address will be used.
- Integrates with various Open Source monitoring packages - Nagios and MRTG. The unit can be polled via SNMP.
- USB ports for connecting USB modem or for downloading log data to USB flash drive.
- Internal battery backup. Alerts are sent when there is a power outage and when power returns.
- Available with optional dual power for connection to two separate power sources.
- Up to five units can be connected via Ethernet connection or using CAT5 expansion cables to increase the number of sensors connected. Cascade up to four E-2D/5D/16D units as slaves to one E-2D/5D/16D master unit via Ethernet connection. Each master and slave unit needs its own unique IP address. Cascade up to four E-16D units as slaves to one E-16D master unit using CAT5/5e/6 patch cables with RJ45 connectors wired straight through. Each slave unit needs its own unique RS485 address value that can range from 1-255. Uses a single Web interface for all systems/sensors connected.
- Available with optional 48VDC or 24VDC power.
- Optional intuitive graphical management software provides an easy-to-use, unified interface for both monitoring and configuring up to 3,000 E-2D/5D/16D, E-SEMS-16(U), IPDU-S4/8 units and all connected sensors.
- 1RU rack mount case is standard. The ENVIROMUX system can be mounted so that the sensor connectors are facing the front or back of the rack.
- Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
- Multi-language support – English, German, Chinese, and Japanese.
- Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.
- Use the E-16D with a wireless router and Wi-Fi Range Extender to create a Wireless Environment Monitoring System. Configure, monitor, and receive alerts without the use of a wired network connection.
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, RoHS
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Depth: 10.01 in
- Height: 1.75 in
- Width: 16.19 in
- Warranty (Length/Type): Two Years
- Power Port: 100 to 240 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.) Power consumption: 35W Connection for Earth Ground. Fuse protection. Optional 48VDC power (not shown). Accepts 36~72VDC (48VDC nominal). Optional 24VDC power (not shown). Accepts 20~32VDC (24VDC nominal). Optional dual power (not shown). Available on AC, 48VDC, and 24VDC models. If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the battery backup.
- RJ45 Sensor Ports: Sixteen RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors.
- Digital Inputs: Eight screw terminals pairs for connecting dry contact devices. Input voltage: 0VDC to +25VDC. Provides +12VDC, 50mA for terminals 1-7, and +12VDC, 350mA for terminal 8 only. Fuse protection.
- Digital Outputs: Four screw terminals pairs. Potential-free relay switch contacts. Normally open / normally closed connection points. Maximum switching load: 0.5A at 100VAC, 1A at 30VDC, 0.5A at 48VDC.
- Beacon Port: One screw terminal pair. Provides +12VDC, 180 mA to supply an alarm beacon. Fuse protection
- Siren Port: One screw terminal pair. Provides +12VDC, 180 mA to supply a siren. Fuse protection
- Aux Power: One screw terminal pair. Provides 12VDC, 150mA.
- USB Device Ports: Four female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive. Two USB ports on front panel and 2 on back panel.
- USB Console Port: One female USB Type B connector for connecting a PC for serial terminal access.
- RS232 (DCS) Port: One female RJ45 serial port for terminal access.
- Ethernet Port: One 10/100 Base-T Ethernet port with RJ45 Ethernet connector. Supports full- and half-duplex.
- RS232 AUX Port: One RJ45 port for connecting a serial GSM modem or a remote serially-controlled device.
- Cascade IN/OUT Ports: Two RJ45 jacks. A maximum of 5 systems can be used in a cascaded configuration via RS485 to increase the number of sensor ports (1 master, 4 slaves). Each slave unit needs its own unique RS485 address value that can range from 1-255. Use CAT5/5e/6 patch cables with RJ45 connectors wired straight through Up to 4,000 feet between the master unit and the slave unit. The last slave must have a terminating plug (E-TRMPLG, not included) in the empty socket. Uses a single Web interface for all systems connected
- Protocols: HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, TLS v1.2, LDAPv3, XOAUTH2, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0, RADIUS Support for XOAUTH2 provides higher security authentication for email accounts (e.g. Gmail). Compatible with any SNMP management software. The unit can be polled via SNMP. Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB/RJ45 serial interface. An IP address can be assigned to the E-16D automatically by a DHCP server. Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem). Alerts are posted in event log, which is accessible through Web user interface. Email alerts can be sent to 17 addresses. Users can configure the schedule for when they will be alerted, as well as customize the e-mail subject line for each sensor alert. SNMP traps have unique OID's (Object Identifiers) for each sensor. OIDs for sensor and contact values for E-16D. Supports HTTP REST API to poll sensor data with response in JSON format.
- Internal Temperature Sensor: For monitoring the temperature inside the E-16D case. Use an external temperature sensor for monitoring ambient air temperature. Applications from 32 to 104°F (0 to 40°C). Accurate to within ±1.35°F (±0.75°C).
- Internal Humidity Sensor: For monitoring the humidity inside the E-16D case. Use an external humidity sensor for monitoring humidity in the air. Applications from 20% to 80% relative humidity at temperatures between 32 to 104°F (0 to 40°C). Accurate to within ±5% relative humidity.
- Internal Power Sensor: Measures mains voltage: 0 to 255 VAC Measures battery voltage: 0 to 20 VDC Measures voltage on 24VDC models: 20 to 32VDC Measures voltage on 48VDC models: 36 to 72VDC Alerts are sent when there is a power outage and when power returns.
- Back-up Battery: Rechargeable sealed lead-acid battery. Battery removal/disposal instructions. Provides back-up for one hour.
- MTBF: E-16D: 39,685 hours.
- Dimensions: WxDxH (all options): Without supplied rackmount kit: 16.19x10.01x1.75" With supplied rackmount kit: 19x10.01x1.75"
- Weight: E-16D: 9.5 lb (4.31 kg). E-16D-48VDP: 9.6 lbs (4.36 kg).
- Environmental: Operating temperature: 32 to 104°F (0 to 40°C). Storage temperature: -22 to 140°F (-30 to 60°C). Operating /Storage Relative Humidity: 17 to 90% non-condensing RH.
- Control Method; Web Interface (view product demo): Configuration can be done over the Internet/LAN or 3G data connection via Web page. 3G data connection requires a USB 3G modem with a data plan. Email and SMS alerts can be sent through the modem instead of the Ethernet connection. Supports Internet Explorer 6.0 and higher, Firefox 1.5 and higher, Netscape 9, Google Chrome, Safari 1.3 and higher for MAC, and Safari 3.0 and higher for PC. Configure sensor thresholds, alarm methods, formats of alerts, and system data log. Customize SMS messages and email subject headers for sensor alerts. View/edit sensors' current values, thresholds and alert statuses. All sensors connected, including up to 8 Remote Temperature/Humidity Sensors over IP, to the E-16D can be viewed on one summary page. All sensors in alert can be quickly viewed on the alert summary page to enable timely responses. User configurable settings allow sensors to return to normal status when alert condition clears, without manually acknowledging/dismissing the alert. View entries stored in the system logs. Event log records system events such as alerts, user login/logout, failed email messages, etc. Data log records samples of sensor readings. User specified sampling time period. With E-16D, both the event log and the data log store up to 1,000 entries. With E-16DEL, up to 1,200,000 data log entries and 3,000 event log entries are stored. 256 MB non-volatile memory – both the data log and event log persist after power cycle. The log can be downloaded as a tab-delimited plain text file. Configure IP information (address, subnet mask, default gateway, DNS, etc.), user administrative settings, and data logging settings. Upload custom x509 certificates. Up to 16 users can access the web page at one time. Permissions, schedule and alert methods are configurable for each user. Configure up to 50 sensor conditions (events). Configure up to 20 Smart Alerts to use different event combinations to send alert messages. Up to five units can be used together to increase the number of sensors connected. Cascade up to four E-2D/5D/16D units as slaves to one E-2D/5D/16D master unit via Ethernet connection. Each master and slave unit needs its own unique IP address. IP sensors can only be connected to a master unit. E-16D slave units can also be configured as RS485 local slave units using CAT5/5e/6 patch cables with RJ45 connectors wired straight through. Each slave unit needs its own unique RS485 address value that can range from 1-255. The last slave must have a terminating plug (not included) in the empty socket. Uses a single Web interface for all systems/sensors connected. Multi-language support – English, German, Chinese, and Japanese. Front Panel Interface LEDs indicate the following: "INT ALERT" – internal sensor goes out of range of a configurable threshold. "EXT ALERT" – external sensor goes out of range of a configurable threshold. "LOW BAT" – backup battery is low. "CHECK LOG" – message is posted to the log. "AUX" – indicates Auxiliary device is powered. "PWR" – indicates system is powered. Alarm Test/Silence button – use to test or silence the alarm connected to the siren terminals Restore Defaults button – use to manually restore the E-16D back to factory settings. System Reset button – use to manually reboot/restart the firmware for the E-16D.
- Control Method; Serial Interface / Telnet / SSH: Configure, control and monitor over the text-based menu system accessible via USB console port, RJ45 serial port, Telnet, and SSH. Serial baud rate: 9,600 to 115,200bps. Data format: 1 start bit, 8 data bits, no parity, 1 stop bit. Access is controlled via username/password. System stores encrypted login information. Two user levels: user and administrator. Multi-language support – English, German, Chinese, and Japanese. Telnet and SSH can be enabled or disabled. Network Security Enhancement: Disabling Telnet can prevent unsecure text menu access to the E-16D.
- Control Method; Network Operation: Automatically configures network settings received from a connected DHCP server. If a DHCP server is not found, the default static IP address will be used. SNMP support, allowing integration into network management platforms. Control output relays via SNMP SET commands to power on/off external devices. SET command can be sent from SNMP software, MIB browser (Windows), or command line (Linux). Updating the system firmware.
- Control Method; Open Source Monitoring Integration: SNMP Plugin for Nagios. NTI SNMP Plugin for Zabbix. Using Multi Router Traffic Grapher (MRTG). Data Logging using Syslog.
- Control Method; Optional Management Software: Optional intuitive graphical management software provides an easy-to-use, unified interface for both monitoring and configuring up to 3,000 E-2D/5D/16D, E-MICRO-T(RHP), E-1W(P), E-SEMS-16(U), IPDU-S4/8 units and all connected sensors. Push configuration changes to multiple connected units in a group at once. E.g. new users, mail server, network settings, security settings, system settings, etc.
- Control Method; Mobile Summary Page (view product demo): View summary page on mobile devices – smartphones, tablets, etc. Summary page lists all connected sensors' current values and alert statuses.
- Control Method; Optional Android App for Tablet/Phone: Optional Android App provides an easy-to-use interface for monitoring and displaying sensor statuses from one E-2D/5D/16D.
E-16D
- Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,000 data log entries; 1,000 event log entries.
E-16D-24V
- Large Enterprise Environment Monitoring System. Power: 24VDC. Logging: 1,000 data log entries; 1,000 event log entries.
E-16D-24VDP
- Large Enterprise Environment Monitoring System. Power: Dual 24VDC. Logging: 1,000 data log entries; 1,000 event log entries.
E-16D-48V
- Large Enterprise Environment Monitoring System. Power: 48VDC. Logging: 1,000 data log entries; 1,000 event log entries.
E-16D-48VDP
- Large Enterprise Environment Monitoring System. Power: Dual 48VDC. Logging: 1,000 data log entries; 1,000 event log entries.
E-16DDP
- Large Enterprise Environment Monitoring System. Power: Dual AC. Logging: 1,000 data log entries; 1,000 event log entries.
E-2W-PLNM-10
- Plenum 22 AWG 2-Wire Sensor Cable, 10 feet
E-2W-PLNM-100
- Plenum 22 AWG 2-Wire Sensor Cable, 100 feet
E-2W-PLNM-1000
- Plenum 22 AWG 2-Wire Sensor Cable, 1000 feet
E-2W-PLNM-25
- Plenum 22 AWG 2-Wire Sensor Cable, 25 feet
E-2W-PLNM-3
- Plenum 22 AWG 2-Wire Sensor Cable, 3 feet
E-2W-PLNM-300
- Plenum 22 AWG 2-Wire Sensor Cable, 300 feet
E-2W-PLNM-50
- Plenum 22 AWG 2-Wire Sensor Cable, 15 feet
E-2W-PLNM-500
- Plenum 22 AWG 2-Wire Sensor Cable, 500 feet
E-2W-PLNM-6
- Plenum 22 AWG 2-Wire Sensor Cable, 6 feet
E-2W-PLNM-700
- Plenum 22 AWG 2-Wire Sensor Cable, 700 feet
E-2WO-10
- Outdoor 22 AWG 2-Wire Sensor Cable, 10 feet
E-2WO-100
- Outdoor 22 AWG 2-Wire Sensor Cable, 100 feet
E-2WO-1000
- Outdoor 22 AWG 2-Wire Sensor Cable, 1000 feet
E-2WO-25
- Outdoor 22 AWG 2-Wire Sensor Cable, 25 feet
E-2WO-3
- Outdoor 22 AWG 2-Wire Sensor Cable, 3 feet
E-2WO-300
- Outdoor 22 AWG 2-Wire Sensor Cable, 300 feet
E-2WO-50
- Outdoor 22 AWG 2-Wire Sensor Cable, 50 feet
E-2WO-500
- Outdoor 22 AWG 2-Wire Sensor Cable, 500 feet
E-2WO-6
- Outdoor 22 AWG 2-Wire Sensor Cable, 6 feet
E-2WO-700
- Outdoor 22 AWG 2-Wire Sensor Cable, 700 feet
E-3GU-4
- USB 3G Modem
E-4GU-1
- USB 4G Modem; 4G LTE Bands Supported: 1/2/4/5/7/28. 4G Frequencies Supported: FDD 700/850/1700/1900/2100/2600 MHz.
E-4GU-2
- USB 4G Modem; 4G LTE Bands Supported: 1/3/7/8/20. 4G Frequencies Supported: FDD 800/900/1800/2100/2600 MHz.
E-4GU-3
- USB 4G Modem; 1/3/7/8/28/40. 4G Frequencies Supported: FDD 700/900/1800/2100/2600 Mhz, TDD 2300 MHz.
E-4GU-5
- USB 4G WiFi Modem
E-4GU-6
- USB 4G Modem, TAA Compliant
E-4WNSC-10
- 4-Wire Non-Sensing Cable, 10 feet
E-4WNSC-100
- 4-Wire Non-Sensing Cable, 100 feet
E-4WNSC-25
- 4-Wire Non-Sensing Cable, 25 feet
E-4WNSC-50
- 4-Wire Non-Sensing Cable, 50 feet
E-ACDCLM
- AC & DC Voltage & Current Monitor
E-ACK
- Access Control Digital Keypad
E-ACK-V2
- Access Control Digital Keypad
E-ACK-VWS
- Vandal Resistant and Weatherproof Access Control Digital Keypads, Single Relay Output
E-ACK-VWT
- Vandal Resistant and Weatherproof Access Control Digital Keypads, Three Relay Outputs
E-ACKR
- RFID Access Control Keypad
E-ACKR-WDB
- Weatherproof RFID Access Control Keypad, Dual + Bell Relay Outputs
E-ACLM-3P480
- 3-Phase AC Power Monitor
E-ACLM-P12
- AC Power Monitor with Relay, Euro/UK, 12A rated load, 15A maximum
E-ACLM-P12-V2
- AC Power Monitor with Relay, US/Canada, 110 Volts, 12A rated load, 15A maximum
E-ACLM-P18
- AC Power Monitor with Relay, US/Canada, 18A rated load, 20A maximum
E-ACLM-P18-V2
- AC Power Monitor with Relay, US/Canada, 220 Volts, 18A rated load, 20A maximum
E-ACLM-P8-V2
- AC Power Monitor with Relay, Euro/UK, 220 Volts, 8A rated load, 10A maximum
E-ACLM-P8; Out of Stock
- AC Power Monitor with Relay, Euro/UK, 8A rated load, 10A maximum
E-ACLM-V
- AC Dual Voltage Monitor; Out of Stock
E-ACLM-V-V2
- AC Dual Voltage Monitor
E-ACVDRLY-515
- AC Voltage Detector with Relay, NEMA 5-15 plug
E-ACVDRLY-C14
- AC Voltage Detector with Relay, IEC C14 socket
E-AFM
- Air Flow Sensor
E-ALDS
- Addressable Leak Detection Sensor
E-AMP10-6-5
- Hall-Effect Current Sensors, Solid-Core, 0.26" Loop Diameter, 10A
E-AMP100-SC12
- Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter, 100A
E-AMP100-SC21
- Hall-Effect Current Sensors, Split-Core, 0.83" Loop Diameter, 50A
E-AMP20-6-5
- Hall-Effect Current Sensors, Solid-Core, 0.26" Loop Diameter, 20A
E-AMP200-SC12
- Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter, 200A
E-AMP200-SC21
- Hall-Effect Current Sensors, Split-Core, 0.83" Loop Diameter, 50A
E-AMP30-SC21
- Hall-Effect Current Sensors, Split-Core, 0.83" Loop Diameter, 30A
E-AMP300-SC12
- Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter, 300A
E-AMP400-SC12
- Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter, 400A
E-AMP50-6-5
- Hall-Effect Current Sensors, Solid-Core, 0.26" Loop Diameter, 50A
E-AMP50-SC12
- Hall-Effect Current Sensors, Split-Core, 0.47" Loop Diameter, 50A
E-AMP50-SC21
- Hall-Effect Current Sensors, Split-Core, 0.83" Loop Diameter, 50A
E-AMP500-SC21
- Hall-Effect Current Sensors, Split-Core, 0.83" Loop Diameter, 50A
E-ANT2-4GU
- Two External Antennas for 4GU Modem
E-APP-ANDROID
- Enterprise Server Environment Monitoring System Android App
E-AV-K
- Air Velocity Sensor
E-AV-LC-7
- Low-Cost Air Velocity Sensor
E-AVDS
- Automatic Voice/Pager Dialer System, Calls 8 Phone Numbers, 4 Input Channels
E-AVDS-4G1
- 4G Automatic Voice Dialer; North America (AT&T), FDD B2/B4/B12
E-AVDS-4G3
- 4G Automatic Voice Dialer; Europe / Middle East / Africa / South Korea / Thailand, FDD B1/3/5/7/8/20
E-AVDS-4G4
- 4G Automatic Voice Dialer; New Zealand / Australia / South America, FDD B1/3/4/5/7/8/28
E-AVDS-CELC
- Low-Cost Automatic Voice Dialer System, CE, Calls 4 Phone Numbers, 1 Input Channel
E-AVDS-CELC-V2
- Low-Cost Automatic Voice Dialer System, CE, Calls 20 Phone Numbers, 2 Input Channels
E-AVDS-CELC-V3
- Low-Cost Automatic Voice Dialer System, CE, Calls 6 Phone Numbers, 3 Input Channels
E-AVDS-GSM; Out of Stock
- GSM Automatic Voice Dialer; Out of Stock
E-AVDS-LC1P
- Automatic Voice Dialer System, Powered, Calls 5 Phone Numbers, 3 Input Channels
E-BATTERY2
- Replacement Back-up Battery for E-16D (non-UL model), E-16DEL, E-16DDP, E-16D-24V(DP), E-16D-48V(DP)
E-BCN-R
- Alarm Beacon – Small: 2.75x1.69 in (70x43 mm)
E-BCN-RL
- Alarm Beacon - Large: 3.94x3.46 in (100x88 mm)
E-BEEP1-1
- Rugged Miniature Piezo Alarm, Panel Mount, 103 dB, 1ft
E-BEEP1-10
- Rugged Miniature Piezo Alarm, Panel Mount, 103 dB, 10ft
E-BEEP1-100
- Rugged Miniature Piezo Alarm, Panel Mount, 103 dB, 100ft
E-BEEP1-1000
- Rugged Miniature Piezo Alarm, Panel Mount, 103 dB, 1000ft
E-BEEP1-200
- Rugged Miniature Piezo Alarm, 103 dB
E-BEEP1-400
- Rugged Miniature Piezo Alarm, 103 dB
E-BEEP1-50
- Rugged Miniature Piezo Alarm, 103 dB
E-BEEP1-600
- Rugged Miniature Piezo Alarm, 103 dB
E-BEEP1-800
- Rugged Miniature Piezo Alarm, 103 dB
E-BEEP1-P1
- Rugged Miniature Piezo Alarm, 103 dB, Powered, 1 foot
E-BEEP2-1
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BEEP2-10
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BEEP2-100
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BEEP2-1000
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BEEP2-200
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BEEP2-400
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BEEP2-50
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BEEP2-600
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BEEP2-800
- Miniature Piezo Buzzer, PCB Mount, 95 dB
E-BPT
- Barometric Pressure Transmitter
E-CD1-y
- Chemical Detection Sensor, 1 foot Chemical Sensor Cable
E-CD10-y
- Chemical Detection Sensor, 10 feet Chemical Sensor Cable
E-CD100-y
- Chemical Detection Sensor, 100 feet Chemical Sensor Cable
E-CD50-y
- Chemical Detection Sensor, 50 feet Chemical Sensor Cable
E-CMD
- Carbon Monoxide Detector, CO
E-CO2
- Carbon Dioxide Sensor, CO2
E-CT100-SC16
- Hinged Split-Core AC Current Transformers
E-CT2000-SC76
- Split-Core AC Current Transformer, Removable Top
E-CT250-SC24
- Hinged Split-Core AC Current Transformers
E-CT50-SC10
- Hinged Split-Core AC Current Transformers
E-CT500-SC36
- Hinged Split-Core AC Current Transformers
E-DCLM-6
- DC Line Monitor
E-DCS-PS2
- Plunger-Style Door Contact Sensor
E-DCSR
- Rugged Door Contact Sensors
E-DCSR-U
- Rugged Door Contact Sensor with Universal-Style Magnet
E-DCSR-UV2
- Rugged Door Contact Sensor with Universal Style Magnet
E-DCSR-V2
- Rugged Door Contact Sensor
E-DI16DO16
- Digital Input/Output Expander (Open-Collector Outputs)
E-DI16DO16-D
- Digital Input/Output Expander, Open-Collector Outputs, DIN Mount
E-DI16DOR16-V2
- Digital Input/Output Expander (Normally-Open Relay Contact Outputs), Desktop
E-DI16DOR16-V2-D
- Digital Input/Output Expander (Normally-Open Relay Contact Outputs)
E-DI16DOR16-V22R
- Digital Input/Output Expander (Normally-Open Relay Contact Outputs), 1RU Dual Side-by-Side Rackmount
E-DI16DOR16-V2R
- Digital Input/Output Expander (Normally-Open Relay Contact Outputs), 1RU Rackmount
E-DUST
- Optical Dust Sensor
E-EBS
- Emergency/Panic Button
E-EDR-SCR-P
- Fail-Secure Electric Strike
E-EDR-SF
- Fail-Safe Electric Strike
E-FACKR
- RFID Access Control Keypad with Biometric Fingerprint Reader
E-FACS
- Fingerprint Access Control System
E-FENCE1
- Fence Vibration Sensor
E-GBS
- Glass Break Detection Sensor
E-GD-MBP
- Gas Detector — Methane, Butane, Propane
E-H2
- Hydrogen Gas Detector
E-H2S
- Hydrogen Sulfide Detector
E-IMD-CM
- Ceiling Mount Motion Detector - CE Compliant
E-IMD-CMP
- Ceiling Mount Motion Detector – CE Compliant
E-IMD-LC
- Low-Cost Infrared Motion Sensor – CE Compliant
E-IMD-LCP
- Low-Cost Infrared Motion Sensor – CE Compliant
E-IMD-O
- Outdoor Infrared Motion Sensor
E-IMD-OHM
- High-Mount Outdoor Infrared Motion Sensor
E-IMD-TAA2
- Infrared Motion Detector - TAA, CE Compliant
E-IMD-TAA2-P
- Infrared Motion Detector - TAA, CE Compliant
E-IPCAM-DHNPO-P
- High-Definition Wired Day/Night Outdoor IP Dome Camera with Power over Ethernet (PoE)
E-IPCAM-DHNPO-V2P
- High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera with Power over Ethernet (PoE)
E-IPCAM-HNPO-P
- Ultra-HD Wired Day/Night Outdoor Bullet IP Camera with Power over Ethernet (POE)
E-IPCAM-SWHNO
- Solar-Powered High-Definition Wireless/Wired Day/Night Outdoor IP Camera
E-IPCAM-WHNO
- High-Definition Wireless/Wired Day/Night Outdoor IP Camera
E-IPCAM-WHNO-V2
- High-Definition Wireless/Wired Day/Night Outdoor Bullet IP Camera
E-IPCAM-WHNPT-V3
- High-Definition Wireless/Wired Day/Night Pan/Tilt IP Camera
E-ISZB
- Zener Barrier – Intrinsically Safe Barrier
E-LD-LC1-y
- Low-Cost Liquid Detection Sensor, Rope-Style, 1 foot Water Sensor Cable
E-LD-LC10-y
- Low-Cost Liquid Detection Sensor, Rope-Style, 10 feet Water Sensor Cable
E-LD-LC100-y
- Low-Cost Liquid Detection Sensor, Rope-Style, 100 feet Water Sensor Cable
E-LD-LC200-y
- Low-Cost Liquid Detection Sensor, Rope-Style, 200 feet Water Sensor Cable
E-LD-LC400-y
- Low-Cost Liquid Detection Sensor, Rope-Style, 400 feet Water Sensor Cable
E-LD-LC50-y
- Low-Cost Liquid Detection Sensor, Rope-Style, 50 feet Water Sensor Cable
E-LD-LC600-y
- Low-Cost Liquid Detection Sensor, Rope-Style, 600 feet Water Sensor Cable
E-LD-SPDT
- Spot Liquid Detector, Point Leak Detection Sensor
E-LD-SPDT-P
- Spot Liquid Detector, Point Leak Detection Sensor
E-LD1-y
- Liquid Detection Sensor, Plenum Rope-Style, 1 foot Water Sensor Cable
E-LD10-y
- Liquid Detection Sensor, Plenum Rope-Style, 10 feet Water Sensor Cable
E-LD100-y
- Liquid Detection Sensor, Plenum Rope-Style, 100 feet Water Sensor Cable
E-LD1000-y
- Liquid Detection Sensor, Plenum Rope-Style, 1000 feet Water Sensor Cable
E-LD200-y
- Liquid Detection Sensor, Plenum Rope-Style, 200 feet Water Sensor Cable
E-LD400-y
- Liquid Detection Sensor, Plenum Rope-Style, 400 feet Water Sensor Cable
E-LD50-y
- Liquid Detection Sensor, Plenum Rope-Style, 50 feet Water Sensor Cable
E-LD600-y
- Liquid Detection Sensor, Plenum Rope-Style, 600 feet Water Sensor Cable
E-LD800-y
- Liquid Detection Sensor, Plenum Rope-Style, 800 feet Water Sensor Cable
E-LDS1-y
- Legacy Liquid Detection Rope Sensor, 1 foot Water Sensor Cable
E-LDS10-y
- Legacy Liquid Detection Rope Sensor, 10 feet Water Sensor Cable
E-LDS100-y
- Legacy Liquid Detection Rope Sensor, 100 feet Water Sensor Cable
E-LDS1000-y
- Legacy Liquid Detection Rope Sensor, 1000 feet Water Sensor Cable
E-LDS200-y
- Legacy Liquid Detection Rope Sensor, 200 feet Water Sensor Cable
E-LDS400-y
- Legacy Liquid Detection Rope Sensor, 400 feet Water Sensor Cable
E-LDS50-y
- Legacy Liquid Detection Rope Sensor, 50 feet Water Sensor Cable
E-LDS600-y
- Legacy Liquid Detection Rope Sensor, 600 feet Water Sensor Cable
E-LDS800-y
- Legacy Liquid Detection Rope Sensor, 800 feet Water Sensor Cable
E-LIS
- Light Intensity Sensor
E-LLDC-10
- Liquid Location Detection Sensor Cable, 10 feet
E-LLDC-100
- Liquid Location Detection Sensor Cable, 100 feet
E-LLDC-25
- Liquid Location Detection Sensor Cable, 25 feet
E-LLS-PF
- Plastic Vertical Liquid Level Float Switch
E-LLS-SF-10CM
- Stainless Steel Vertical Liquid Level Float Switch
E-LLS-SF-25CM
- Stainless Steel Vertical Liquid Level Float Switch
E-LTA-RYG
- LED Light Tower with Buzzer Alarm – Red, Yellow, Green
E-M-DCS3
- Door Contact Sensor
E-M-DCS3-TAA
- Door Contact Sensor, TAA Compliant
E-MICRO-T
- Micro Environment Monitoring System /Remote Temperature Sensor over IP
E-MICRO-TRH
- Micro Environment Monitoring System / Remote Temperature/Humidity Sensor over IP, Integrated Temp/Humidity Sensor. One power supply included.
E-MICRO-TRH-TAA
- Micro Environment Monitoring System, Integrated Temp/Humidity Sensor. One power supply included. TAA compliant.
E-MICRO-TRHP
- Micro Environment Monitoring System /Remote Temperature/Humidity Sensor over IP
E-MNG-0010
- Enterprise Server Environment Monitoring System Management Software: 10 units
E-MNG-0100
- Enterprise Server Environment Monitoring System Management Software: 100 units
E-MNG-0500
- Enterprise Server Environment Monitoring System Management Software: 500 units
E-MNG-3000
- Enterprise Server Environment Monitoring System Management Software: 3,000 units
E-MNG-SH
- Self-Hosted Enterprise Environment Monitoring System Management Software
E-NLS
- Noise Level Sensor
E-PBD-DO290
- Dual Photobeam Detector, Indoor to 590', Outdoor to 290'
E-PBD-DO390
- Dual Photobeam Detector, Indoor to 790', Outdoor to 390'
E-PBD-DO90
- Dual Photobeam Detector, Indoor to 190', Outdoor to 90'
E-PBD-SO50
- Single Photobeam Detector, Indoor/Outdoor to 50'
E-PLSD
- Programmable LED Sensor Display
E-PST1000IS
- Intrinsically Safe Pressure Sensor Transmitter, 0 to 1000 psig
E-PST100IS
- Intrinsically Safe Pressure Sensor Transmitter, 0 to 100 psig
E-PST200IS
- Intrinsically Safe Pressure Sensor Transmitter, 0 to 200 psig
E-PST3000IS
- Intrinsically Safe Pressure Sensor Transmitter, 0 to 3000 psig
E-PST500
- Pressure Sensor Transmitter, 0 to 500 psi
E-PST500IS
- Intrinsically Safe Pressure Sensor Transmitter, 0 to 500 psig
E-RJ8-RS485
- 8-port RJ45 RS485 Sensor Port Hub
E-RJ8-RS485-D
- 8-port RJ45 RS485 Sensor Expander, Din Mount
E-RJ8-RS485-R
- 8-port RJ45 RS485 Sensor Expander, 1RU Rackmount
E-RKS
- Remote Key Station
E-RTDS-A1112
- All-Purpose 100 Ohm RTD Sensor, -328°F to +1112°F
E-RTDS-A221
- All-Purpose 100 Ohm RTD Sensor, -67°F to 221°F
E-RTDS-D240
- Duct 100 Ohm RTD Sensor, -67°F to 240°F
E-RTDS-ER230
- Rugged Encapsulated 100 Ohm RTD Sensor, -30°F to 230°F
E-RTDS-MP240
- Mini Probe 100 Ohm RTD Sensor, -67°F to 240°F
E-RTDS-PAR540-12IN
- Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 6" to 12"
E-RTDS-PAR540-2IN
- Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 1.25" to 2"
E-RTDS-PAR540-6IN
- Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F, 2" to 6"
E-RTDT-140
- 100 Ohm Platinum RTD Transmitter
E-RTDT-1562
- High-Accuracy Platinum RTD Transmitter, -328°F to 1562°F
E-RTDT-240
- 100 Ohm Platinum RTD Transmitter
E-S420MA-24V
- 4-20mA Sensor Converter
E-S5VDC
- 5VDC Sensor Converter
E-S60VDC
- DC Voltage Monitor
E-SDS
- Smoke Detection Sensor - UL Approved
E-SDS-120V
- Smoke Detection Sensor – 120VAC Wire-In with Battery Backup
E-SDS-CELC
- Low-Cost Smoke Detection Sensor – CE Approved
E-SDS-CELC-V2
- Low-Cost Smoke Detection Sensor – CE Approved
E-SDS-TAA-V2
- Smoke Detector with Built-In Fixed-Temperature 135°F (57°C) Heat Sensor – UL Approved, TAA Compliant
E-SER-2FOSMST
- RS485/RS232/RS422 to Fiber Converter/Extender, Singlemode, ST Connectors
E-SLDO-14
- Compact-Size Spot Liquid Detector, Point Leak Detection Sensor
E-SLDO-14-240VTR
- Compact-Size Spot Liquid Detector, Point Leak Detection Sensor
E-SLDO-A
- Spot Liquid Detector with Built-In Visual & Audible Alarm
E-SLDO-AP
- Compact-Size Spot Liquid Detector, Point Leak Detection Sensor
E-SOD-3M
- Outdoor Oil Leak Detection Sensor
E-SRN-BCNL-O
- IP65 Indoor/Outdoor Piezo Siren with LED Strobe Beacon, 110 dB, Blue
E-SRN-BCNR-O
- IP65 Indoor/Outdoor Piezo Siren with LED Strobe Beacon, 110 dB, Red
E-SRN-M
- Piezo Siren, 108 dB
E-STHS-LCDW
- Temperature/Humidity Sensor with 3-Digit 7-Segment LCD Display
E-STHS-LSH
- Fan-Aspirated Temperature/Humidity/Dew Point Sensor, Low Self-Heating
E-STHS-PRC
- Low-Cost Precision Temperature/Humidity/Dew Point Sensor, 14 to 140°F (-10 to 60°C)
E-STHSB-D
- Temperature/Humidity/Dew Point Sensor, DIN Mounted
E-STHSB-N4085IND-10
- Industrial Temperature/Humidity Sensor, -40 to 185°F (-40 to 85°C), 10 feet
E-STHSB-N4085IND-100
- Industrial Temperature/Humidity Sensor, -40 to 185°F (-40 to 85°C), 100 feet
E-STHSB-N4085IND-25
- Industrial Temperature/Humidity Sensor, -40 to 185°F (-40 to 85°C), 25 feet
E-STHSB-N4085IND-50
- Industrial Temperature/Humidity Sensor, -40 to 185°F (-40 to 85°C), 50 feet
E-STHSM-E7
- Probe-Style Temperature/Humidity/Dew Point Sensor
E-STS
- Temperature Sensor
E-STS-O
- Outdoor Temperature Sensor
E-STSM-E7
- Probe-Style Temperature Sensor
E-STSMA-E7
- Probe-Style Temperature Sensor, Aluminum
E-STSP-7
- Pipe Temperature Sensor
E-STSP-SL-7
- Strap-On Pipe Temperature Sensor, Spring-Loaded
E-TDS
- Tamper Switch
E-TLD-10
- Tape-Style Liquid Detector, 10 ft
E-TLD-100
- Tape-Style Liquid Detector, 100 ft
E-TLD-25
- Tape-Style Liquid Detector, 25 ft
E-TLD-50
- Tape-Style Liquid Detector, 50 ft
E-TLD-P10
- Tape-Style Liquid Detector, 10 feet
E-TLD-P100
- Tape-Style Liquid Detector, 100 feet
E-TLD-P25
- Tape-Style Liquid Detector, 25 feet
E-TLD-P50
- Tape-Style Liquid Detector, 50 feet
E-TMAPS-10W
- Triggerable Audio Player with Built-In 10W Amplified Speaker
E-UCLD-10
- Under Carpet Leak Detector, 10 feet
E-UCLD-100
- Under Carpet Leak Detector, 100 feet
E-UCLD-1000
- Under Carpet Leak Detector, 1000 feet
E-UCLD-200
- Under Carpet Leak Detector, 200 feet
E-UCLD-25
- Under Carpet Leak Detector, 10 feet
E-UCLD-400
- Under Carpet Leak Detector, 400 feet
E-UCLD-50
- Under Carpet Leak Detector, 33 feet
E-UCLD-600
- Under Carpet Leak Detector, 600 feet
E-ULT
- Ultrasonic Level Transmitter, 49" Range
E-ULT25IS
- Intrinsically Safe Ultrasonic Level Transmitter, 25' Range
E-VSSB
- Vibration Sensor - Registers Movement & Shocks
E-VSSR-10
- Rugged Vibration Sensor – Detect Over- or Under-Vibration in Machinery
E-WIFI-RE
- WiFi Range Extender, 300 Mbps
E-WSS
- Wind Speed Sensor/Anemometer
High-Definition Wireless/Wired Day/Night Pan/Tilt IP Camera
- E-IPCAM-WHNPT-V4
SP-RS485-12V-O
- Weather Resistant Surge Protector for RS485 Control & 12VDC Power Lines
Enterprise Server Environment Monitoring System
432516 kb
- Data Sheet
Environmental Sensors
583313 kb
- Data Sheet
Alert & Communication Accessories
316283 kb
- Data Sheet
Motion/Intrusion/Vibration Sensors
477686 kb
- Data Sheet
Power Relays & Sensors
318655 kb
- Data Sheet
Sensor Accessories
241471 kb
- Data Sheet
Replacement Back-up Battery
339476 kb
- Data Sheet
How To: Configure Router for Remote Access to ENVIROMUX
217538 kb
- Instructions
How To: Locating OIDs Using a MIB Browser
793532 kb
- Instructions
How To: How to Send SMS Messages to 18-34 Users
456565 kb
- Instructions
How To: How to Install Console Drivers on Windows 8 Computer for E-16D
54702 kb
- Instructions
How To: How to Calibrate the Internal Humidity Sensor
505141 kb
- Instructions
How To: How to Use LDAP Server with the E-16D
232155 kb
- Instructions
How To: How To Setup Syslog in an ENVIROMUX Enterprise Environment Monitoring System
265156 kb
- Instructions
How To: How to Restore Defaults via RS232
480216 kb
- Instructions
How To: How to remove and dispose back-up battery
109053 kb
- Instructions
How To: How to remove and dispose back-up battery
216297 kb
- Instructions
How To: How to Install E-LD to E-xD Using Connection to USB Console
320958 kb
- Instructions
Installation and Operation Manual
14597887 kb
- Instructions
Installation and Operation Manual
14597887 kb
- Instructions
Installation and Operation Manual
14597872 kb
- Instructions
E-16D – Quick Installation Guide
163913 kb
- Instructions
Serial Control Manual
3598668 kb
- Instructions
E-CLP100-LD
Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 10 pack
E-CLP10-LD
Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 10 pack
E-RFID-CRD10
RFID EM Cards, 10-Pack
E-RFID-KYFB10
RFID EM Keyfobs, 10-Pack
E-RL-16D
Extension Rail Kit
E-RLY-SDS120V
Smoke Alarm Relay Module Compatible with E-SDS-120V
E-TRMPLG
Terminating Plug for RS485 Cascade Configurations
Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 10 pack
E-CLP10-LD
Self-Adhesive Clips for Liquid/Chemical Sensor Rope, 10 pack
E-RFID-CRD10
RFID EM Cards, 10-Pack
E-RFID-KYFB10
RFID EM Keyfobs, 10-Pack
E-RL-16D
Extension Rail Kit
E-RLY-SDS120V
Smoke Alarm Relay Module Compatible with E-SDS-120V
E-TRMPLG
Terminating Plug for RS485 Cascade Configurations
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact USIS AV
close
USIS AV
35 West Jefferson Ave
Pearl River, NY 10965
USA
(845) 358-7755
https://www.usisav.net/
Contact in regards to this product:
Network Technologies Inc (NTI)
Model: E-16DEL
Request more information from a dealer near you
close
Request more information from a dealer near you
bottom of page